On Wed, 2007-10-03 at 21:54 +0100, Alan Cox wrote: > On Wed, 03 Oct 2007 16:29:58 -0400 > Jeff Garzik <[EMAIL PROTECTED]> wrote: > > > [EMAIL PROTECTED] wrote: > > > From: Alan Cox <[EMAIL PROTECTED]> > > > > > > This patch assumes the mode filter patches were applied, if not then ping > > > me and I'll send the trivially different patch (extra argument to > > > mode_filter) > > > > > > Don't assume the BIOS can validate modes or has any sense at all. > > > Instead use > > > the BIOS timings to deduce the modes. > > > > > > Signed-off-by: Alan Cox <[EMAIL PROTECTED]> > > > Cc: Tejun Heo <[EMAIL PROTECTED]> > > > Signed-off-by: Andrew Morton <[EMAIL PROTECTED]> > > > --- > > > > > > drivers/ata/Kconfig | 9 > > > drivers/ata/Makefile | 2 > > > drivers/ata/pata_acpi.c | 403 ++++++++++++++++++++++++++++++++++++++ > > > 3 files changed, 414 insertions(+) > > > > Can I get a better email subject and patch description please? > > > > Just reply to this email, and I can hand-edit the patch from there. > > > > "pata_acpi: restore driver" is a bad one-line summary, because nothing > > was lost (hence nothing to be restored). it's simply a new driver. > > > > The patch description is also wanting -- it describes work-in-progress, > > but should really be a summary of what the pata_acpi driver is, why we > > want it, and how it works. > > > > Email some text, and I shall apply straightaway > > > On a cable there may be > eighty wires or perhaps forty > and we learn about its type > In the world of ACPI > > So we call the GTM > And we find the the timing rate > And we look through it to see > If eighty wire it must be > > Timing lives in ACPI routines > ACPI routines, ACPI routines > Timing lives in ACPI routines > ACPI routes ACPI routines > > And the drivers call into see > Which cable type its to be > And the code begins to work > > Timing lives in ACPI routines > ACPI routines, ACPI routines > Timing lives in ACPI routines > ACPI routes ACPI routines > > [Full speed ahead, Mr Hacker, full speed ahead] > Full speed over here sir! > Checking Cable, checking cable > Aye aye, 80 wire, > Heaven heaven] > > If we use ACPI (ACPI) > Every box (every box) has all we need (has all we need) > Cable type (cable type) and mode timing (mode timing) > In our ATA (in our ATA) subroutines (subroutines, ha ha) > > Timing lives in ACPI routines > ACPI routines, ACPI routines > Timing lives in ACPI routines > ACPI routes ACPI routines > Timing lives in ACPI routines > ACPI routines, ACPI routines > Timing lives in ACPI routines > ACPI routes ACPI routines
If you could do a few SCSI ones, I'd particularly appreciate one to the tune of Lucy in the Sky with Diamonds (although it's not on the same album, unfortunately) ... James - To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html
