Load IDE_SECTOR_REG after IDE_FEATURE_REG and IDE_NSECTOR_REG when using CHS.
This patch is basically a preparation for the next one which converts
__ide_do_rw_disk() to use struct ide_taskfile.
It shouldn't affect anything (just a usual paranoia to separate changes
which change the way in which hardware is accessed from code cleanups).
Signed-off-by: Bartlomiej Zolnierkiewicz <[EMAIL PROTECTED]>
---
drivers/ide/ide-disk.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
Index: b/drivers/ide/ide-disk.c
===================================================================
--- a/drivers/ide/ide-disk.c
+++ b/drivers/ide/ide-disk.c
@@ -238,7 +238,6 @@ static ide_startstop_t __ide_do_rw_disk(
unsigned int sect,head,cyl,track;
track = (int)block / drive->sect;
sect = (int)block % drive->sect + 1;
- hwif->OUTB(sect, IDE_SECTOR_REG);
head = track % drive->head;
cyl = track / drive->head;
@@ -246,6 +245,7 @@ static ide_startstop_t __ide_do_rw_disk(
hwif->OUTB(0x00, IDE_FEATURE_REG);
hwif->OUTB(nsectors.b.low, IDE_NSECTOR_REG);
+ hwif->OUTB(sect, IDE_SECTOR_REG);
hwif->OUTB(cyl, IDE_LCYL_REG);
hwif->OUTB(cyl>>8, IDE_HCYL_REG);
hwif->OUTB(head|drive->select.all,IDE_SELECT_REG);
-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
