Robert Hancock wrote: > Mark Lord wrote: >> Tejun Heo wrote: >>> Hello, guys. >>> >>> We still have three problems with ADMA. >>> >>> * hard lockup during resume * occasional hard lockup after >>> hotplug or other erros (probably related to the above?) > > This has only been reported on one person's MSI board. Apparently > another revision of the same board is reported to work, and I can't > duplicate the problem on my Asus board, so it could just be some > hardware problem on that motherboard.
IIRC, I have two from suse bug reports and both resolved with adma=0. I'm not too sure whether post 2.6.23-rcX changes would have fixed those problems tho. FWIW, I've disabled ADMA mode on all suse products. > I still can't say I'm really in favor of it.. In particular to do so > for 2.6.24 right now seems excessive, as none of these problems are > regressions from 2.6.23, and these controllers haven't been tested in > non-ADMA mode very much since it was made the default, so that change > might actually cause regressions. Technically, they're regressions from pre-ADMA days - pretty grave ones considering some of the failure modes include hard lock up. Also, they don't seem resolvable in foreseeable future at this point. If this isn't gonna improve, I think we should just drop ADMA support altogether and concentrate on stabilizing non-ADMA operation. Stability is far more important than small performance improvements or feature supports. But, yeah, you're right in that the change might cause more problems. What's your estimation of such possibility? I generally feel good about non-ADMA mode operation as they seem to solve most reported sata_nv bugs but I haven't really followed sata_nv code changes recently. Maybe this can be resolved by going through one more -rc cycle after the change if that's possible. Thanks. -- tejun - To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html