On 1/11/08, Alan Cox <[EMAIL PROTECTED]> wrote: > > My concern with disabling the new drivers is as follows: I use this > > linux kernel and config image to boot machines over PXE and call a > > shred program on each of the harddrives. If I turn off CONFIG_ATA, > > will this limit my ability to support various new IDE and SATA drives > > for running shred? So far, the configuration I have works well with > > Yes. In that case you can build without CONFIG_IDE_PIIX and with the > CONFIG_ATA_PIIX driver and you should be fine too (but your disk will > move to /dev/sda on that box). The PIIX is an awkward case as in some > modes it combines both the SATA and PATA onto one 'device'.
In looking through my config file, I don't see "CONFIG_IDE_PIIX". Below is a list of all the config entries that contain the patter "PIIX": CONFIG_BLK_DEV_PIIX=y CONFIG_ATA_PIIX=y CONFIG_PATA_MPIIX=y CONFIG_PATA_OLDPIIX=y Any suggestions on how I may turn of the conflicting piix support? Perhaps set CONFIG_PATA_OLDPIIX to n? Thank you! -- Kristin Vadas Marsicano [EMAIL PROTECTED] kristinisme.blogspot.com - To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html
