On Sunday 13 October 2002 03:16 am, Stiven Andre wrote: adding Option "IgnoreEDID" "1" to my "Device" section in my XF86Config-4 solved it. my card does have tv-out, but i dont think that was the problem (nothing was connected)
tal. > From: Amir Tal <[EMAIL PROTECTED]> > > >Reply-To: [EMAIL PROTECTED] > >To: Daniel Pearson <[EMAIL PROTECTED]> > >CC: [EMAIL PROTECTED] > >Subject: Re: XF86Config problem > >Date: Tue, 8 Oct 2002 20:34:29 +0200 > > > >On Tuesday 08 October 2002 06:25 pm, Daniel Pearson wrote: > > > On Tue, Oct 08, 2002, Amir Tal <[EMAIL PROTECTED]> wrote the following: > > > > this is mandrake 9, fresh install . > > > > my card is NVidia GEforce MX. everything worked very nicly after > > > > installation. i rebooted the machine today, and X will not load. it > > > > complains that "no screens found", which is kinda redicules since i > > > >didnt > > > > > > change anything in the config file, and didnt change anything in my > > > > hardware since the last time it worked. > > > > > > Look for clues in /var/log/XFree86.0.log. If it doesn't make any sense > > > to you, try posting it to the list and let others take a look at it. > > > >log attached. > >anyone ? > >tal. > ><< XFree86.0.log >> > > May be it will not help but. I had the same problem with my Radeon VE card. > It worked fine and then just stoped working with the same message. The > problem was in the TV out. If your card has a TV out and you have connected > something to it, just unplug the cable and then reboot your machine twice > and try to start the X server. > > Regards. > S.A. > > _________________________________________________________________ > MSN Photos is the easiest way to share and print your photos: > http://photos.msn.com/support/worldwide.aspx > > > ================================================================= > To unsubscribe, send mail to [EMAIL PROTECTED] with > the word "unsubscribe" in the message body, e.g., run the command > echo unsubscribe | mail [EMAIL PROTECTED] ================================================================To unsubscribe, send mail to [EMAIL PROTECTED] with the word "unsubscribe" in the message body, e.g., run the command echo unsubscribe | mail [EMAIL PROTECTED]
