hello,
well i saw that u have used IO8+cards.
i have a problem with IO 8+ card.
i have installed an IO 8+ card on a RH5.2 machine.
I am able to see that the devices are loaded by viewing lsmod output.
oi have also created the required device files, namely /dev/ttyW* and
/dev/cuw* .
but when i connect the modem to any of the port and run cu ,
it says connected.
but the AT commands are not working.
The same modem works when connected to the standard serial port.
Please help
regards
#################################################################
# #
# Divakaran U.M. #
# Engineer (Customer Services) #
# CMC Ltd., Bangalore; #
# www.cmcltd.com #
# ###############################################################
On Wed, 19 Apr 2000, Rakesh Tiwari wrote:
> Hello Pradish
> I had also brought the SX cards but it did not work on RH 6.1 the patch
> is for kernel 2.2.14 , but it does not work .
> The modem does not get a HUP signal even after the prson has
> disconnected from the server.
> So logically the bash still remains on that port and no one else can
> connect.
> I had done a stand by solution by writting a program to kill bash with
> HUP after the ppp disconnects .
> I even talked to Rodger Wolf who has written the driver for SX /SI
> cards.
> www.bitwizard.nl
>
> Even he was not able to solve his own problem.
> I was very dissappointed he even gave me a new patch (unreleased) of his
> for 2.2.15pre12 kernel but it gives me reject so that is also not
> working so i had to switch back to IO 8+ cards.
> Till the driver is in the 2.2.15 kernel thats what i think
>
>
>
> -----------------------------------------------------------------------
> The LIH mailing list archives are available at:
> http://lists.linux-india.org/cgi-bin/wilma/linux-india-help
>
-----------------------------------------------------------------------
For information on this and other Linux India mailing lists check out
http://lists.linux-india.org/
