Hi folks,
following are the messages of startx. gnome is launching but screen is
almost black and nothing can be read, though keys are working.
pressing ctrl-alt+ brings the display to single screen.
what to do.
somebody has asked how to find x version running on your box. here it is
displayed.
is there any method of adding/removing CR/^M from (CR-LF) while
transferring files between *nix and win. it took me ages to split these
lines in this long linux file, as i used netscape messenger in win.
regards.
-vulcan
------------------
XFree86 Version 3.3.3.1 / X Window System
(protocol Version 11, revision 0, vendor release 6300)
Release Date: January 4 1999
If the server is older than 6-12 months, or if your card is newer
than the above date, look for a newer version before reporting
problems. (see http://www.XFree86.Org/FAQ)
Operating System: Linux 2.2.1-ac1 i686 [ELF]
Configured drivers:
SVGA: server for SVGA graphics adaptors (Patchlevel 0):
NV1, STG2000, RIVA128, RIVATNT, ET4000, ET4000W32, ET4000W32i,
ET4000W32i_rev_b, ET4000W32i_rev_c, ET4000W32p, ET4000W32p_rev_a,
ET4000W32p_rev_b, ET4000W32p_rev_c, ET4000W32p_rev_d, ET6000,
ET6100,
et3000, pvga1, wd90c00, wd90c10, wd90c30, wd90c24, wd90c31,
wd90c33,
gvga, ati, sis86c201, sis86c202, sis86c205, sis86c215, sis86c225,
sis5597, sis5598, sis6326, tvga8200lx, tvga8800cs, tvga8900b,
tvga8900c, tvga8900cl, tvga8900d, tvga9000, tvga9000i, tvga9100b,
tvga9200cxr, tgui9400cxi, tgui9420, tgui9420dgi, tgui9430dgi,
tgui9440agi, cyber9320, tgui9660, tgui9680, tgui9682, tgui9685,
cyber9382, cyber9385, cyber9388, cyber9397, cyber9520, 3dimage975,
3dimage985, clgd5420, clgd5422, clgd5424, clgd5426, clgd5428,
clgd5429, clgd5430, clgd5434, clgd5436, clgd5446, clgd5480,
clgd5462,
clgd5464, clgd5465, clgd6205, clgd6215, clgd6225, clgd6235,
clgd7541,
clgd7542, clgd7543, clgd7548, clgd7555, clgd7556, ncr77c22,
ncr77c22e,
cpq_avga, mga2064w, mga1064sg, mga2164w, mga2164w AGP, mgag200,
mgag100, oti067, oti077, oti087, oti037c, al2101, ali2228,
ali2301,
ali2302, ali2308, ali2401, cl6410, cl6412, cl6420, cl6440, video7,
ark1000vl, ark1000pv, ark2000pv, ark2000mt, mx, realtek, s3_virge,
AP6422, AT24, AT3D, s3_svga, NM2070, NM2090, NM2093, NM2097,
NM2160,
NM2200, ct65520, ct65525, ct65530, ct65535, ct65540, ct65545,
ct65546,
ct65548, ct65550, ct65554, ct65555, ct68554, ct69000, ct64200,
ct64300, mediagx, V1000, V2x00, p9100, spc8110, generic
(using VT number 7)
XF86Config: /usr/X11R6/lib/X11/XF86Config
(**) stands for supplied, (--) stands for probed/default values
(**) XKB: keycodes: "xfree86"
(**) XKB: types: "default"
(**) XKB: compat: "default"
(**) XKB: symbols: "us(pc101)"
(**) XKB: geometry: "pc"
(**) XKB: rules: "xfree86"
(**) XKB: model: "pc101"
(**) XKB: layout: "us"
(**) Mouse: type: Microsoft, device: /dev/mouse, baudrate: 1200
(**) Mouse: buttons: 3
(**) SVGA: Graphics device ID: "My Video Card"
(**) SVGA: Monitor ID: "My Monitor"
(--) SVGA: Mode "640x480" needs hsync freq of 53.01 kHz. Deleted.
(--) SVGA: Mode "1152x864" needs hsync freq of 53.51 kHz. Deleted.
(--) SVGA: Mode "800x600" needs hsync freq of 55.84 kHz. Deleted.
(--) SVGA: Mode "1024x768" needs hsync freq of 56.48 kHz. Deleted.
(--) SVGA: Mode "1280x1024" needs hsync freq of 51.02 kHz. Deleted.
(--) SVGA: Mode "800x600" needs hsync freq of 64.02 kHz. Deleted.
(--) SVGA: Mode "1024x768" needs hsync freq of 62.50 kHz. Deleted.
(--) SVGA: Mode "1152x864" needs hsync freq of 62.42 kHz. Deleted.
(--) SVGA: Mode "1280x1024" needs hsync freq of 64.25 kHz. Deleted.
(--) SVGA: Mode "1024x768" needs hsync freq of 70.24 kHz. Deleted.
(--) SVGA: Mode "1152x864" needs hsync freq of 70.88 kHz. Deleted.
(--) SVGA: Mode "1280x1024" needs hsync freq of 74.59 kHz. Deleted.
(--) SVGA: Mode "1600x1200" needs hsync freq of 75.00 kHz. Deleted.
(--) SVGA: Mode "1152x864" needs hsync freq of 76.01 kHz. Deleted.
(--) SVGA: Mode "1280x1024" needs hsync freq of 78.86 kHz. Deleted.
(--) SVGA: Mode "1024x768" needs hsync freq of 80.21 kHz. Deleted.
(--) SVGA: Mode "1280x1024" needs hsync freq of 81.13 kHz. Deleted.
(--) SVGA: Mode "1600x1200" needs hsync freq of 87.50 kHz. Deleted.
(--) SVGA: Mode "1152x864" needs hsync freq of 89.62 kHz. Deleted.
(--) SVGA: Mode "1280x1024" needs hsync freq of 91.15 kHz. Deleted.
(--) SVGA: Mode "1600x1200" needs hsync freq of 93.75 kHz. Deleted.
(--) SVGA: Mode "1600x1200" needs hsync freq of 105.77 kHz. Deleted.
(--) SVGA: Mode "1280x1024" needs hsync freq of 107.16 kHz. Deleted.
(--) SVGA: Mode "1800X1440" needs hsync freq of 96.15 kHz. Deleted.
(--) SVGA: Mode "1800X1440" needs hsync freq of 104.52 kHz. Deleted.
(**) FontPath set to "unix/:-1"
(--) SVGA: PCI: SiS 6326 rev 146, Memory @ 0xe6000000, 0xe5000000, I/O @
0xd000
(--) SVGA: using programmable clocks.
(--) SVGA: chipset: sis6326
(--) SVGA: videoram: 1024k
(**) SVGA: Using 8 bpp, Depth 8, Color weight: 666
(--) SVGA: Maximum allowed dot-clock: 175.500 MHz
(**) SVGA: Mode "640x480": mode clock = 36.000
(**) SVGA: Mode "800x600": mode clock = 50.000
(**) SVGA: Mode "1024x768": mode clock = 65.000
(--) SVGA: Virtual resolution set to 1024x768
(--) SVGA: Generic SpeedUps selected (Flags=0x30)
(--) SVGA: Using Linear Frame Buffer at 0x0e6000000, Size 1MB
(--) SVGA: SIS: Memory mapped I/O selected at 0x0a0000
(**) SVGA: Using hardware cursor
(--) SVGA: sis6326: MClk = 75169000 Hz
(--) SVGA: Using XAA (XFree86 Acceleration Architecture)
(--) SVGA: XAA: Solid filled rectangles
(--) SVGA: XAA: Screen-to-screen copy
(--) SVGA: XAA: 8x8 color expand pattern fill
(--) SVGA: XAA: Indirect CPU to screen color expansion (imagetext,
polytext)
(--) SVGA: XAA: Using 8 128x128 areas for pixmap caching
(--) SVGA: XAA: Caching tiles and stipples
(--) SVGA: XAA: Horizontal and vertical lines and segments
SetKbdSettings - type: 2 rate: 5 delay: 500 snumlk: 0
SetKbdSettings - Succeeded
xscreensaver-command: no screensaver is running on display :0.0
xscreensaver disabling server builtin screensaver.
xscreensaver: you can re-enable it with "xset s on".
(--) SVGA: sis6326: MClk = 75169000 Hz
(--) SVGA: sis6326: MClk = 75169000 Hz
(--) SVGA: sis6326: MClk = 75169000 Hz
(--) SVGA: sis6326: MClk = 75169000 Hz
(--) SVGA: sis6326: MClk = 75169000 Hz
Gdk-ERROR **: an x io error occurred
aborting...
xinit: connection to X server lost.
waiting for X server to shut down
Gdk-ERROR **: an x io error occurred
aborting...
Gdk-WARNING **: GdkWindow 0x2c00005 unexpectedly destroyed
Gdk-ERROR **: an x io error occurred
aborting...
------------------
after it came out on the prompt the following message was appearing
twice on the screen:-
Gdk-Message: Got event for unknown window: 0
-----------------------------------------------------------------------
Check out the 'What to do before posting to the list' site
for a list of things to try before posting. The site is
at http://botsie.tripod.com/beforeposting/
