This means that your HDD and bus are not syncing somewhere.
Some mismatch with the CPU speed, usually means that your HDD is
malfunctioning. Try to low level format your HDD and see if that solves the
problem, OR go for a slower processor.
----- Original Message -----
From: "Amol Gokhale" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Cc: <[EMAIL PROTECTED]>
Sent: Tuesday, November 07, 2000 11:22 AM
Subject: [ILUG-BOM] Signal 7/9 error
> Mail from ILUG-BOM list (Non-Digest Mode)
> _______________________________________________
>
> Hi guys,
>
> While installing Linux on an old 261 MB hdd. Rhl 6.1/6.2 is exiting with a
> signal7/9 respectively error.
> Any idea what this means.
>
> Amol Gokhale
>
> _______________________________________________
> Next Meet on 12th Nov 2000 at HBCSE
> Website: http://www.ilug-bom.org.in/
> Linuxers mailing list [EMAIL PROTECTED]
> http://ilug-bom.org.in/mailman/listinfo/linuxers
> CHAT: irc.ilug-bom.org.in
>
----------------------------------------------
The mailing list archives are available at
http://lists.linux-india.org/cgi-bin/wilma/LIH
