Hi,
My scsi controller has some probs right now. I will try this once I
get it working.
Thanks again
Nick
-----Original Message-----
From: VaibhaV [mailto:[EMAIL PROTECTED]]
Sent: Thursday, June 21, 2001 5:18 PM
To: '[EMAIL PROTECTED]'
Subject: Re: [LIH] Booting with ide/scsi
Hello,
What scsi controller do you have?
Have you tried makinitrd to make an initial ramdisk for the kernel that
you have from the installation on the scsi disk, and including it in the
lilo.conf. This would include the scsi drivers needed to access the scsi
disk on boot.
Here is an extract for an example
image=/boot/vmlinuz-2.2.17-14
label=linux
initrd=/boot/initrd-2.2.17-14.img
root=/dev/sda9
read-only
HTH
VaibhaV
On Thu, 21 Jun 2001, Joseph, VivekNicholas wrote:
> Hi,
> I have an ide disk(embedded controller) with linux installed & I
> also have a scsi disk (connected to an add on controller) with linux on
that
> too. When I try to boot the system, it boots only thru' ide & not thru'
> scsi. Is there anyway I can change it to boot thru' scsi?
> Scsi disk doesn't appear in the boot order .
>
> Regards
> Nick
>
> _______________________________________________
> linux-india-help mailing list
> [EMAIL PROTECTED]
> http://lists.sourceforge.net/lists/listinfo/linux-india-help
>
--
Politicians and Diapers both need to be changed often,
and for the same reason.
----------------------------------------------------------
VaibhaV Sharma | [EMAIL PROTECTED]
Exocore Consulting | http://www.exocore.com
Bangalore, India | +91 (80) 3440397
----------------------------------------------------------
_______________________________________________
linux-india-help mailing list
[EMAIL PROTECTED]
http://lists.sourceforge.net/lists/listinfo/linux-india-help
_______________________________________________
linux-india-help mailing list
[EMAIL PROTECTED]
http://lists.sourceforge.net/lists/listinfo/linux-india-help
