--- Shridhar Daithankar <[EMAIL PROTECTED]> wrote:
> Can you post output of hdparm -i /dev/hda. This is really confusing. 40GB is
> not that big disk. Linux should get it.
well well u see the attachment:trial.txt
cacofonixx
the lost one
__________________________________________________
Do You Yahoo!?
Listen to your Yahoo! Mail messages from any phone.
http://phone.yahoo.com
/dev/hda:
Model=ST34321A, FwRev=3.29, SerialNo=GY140432
Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs RotSpdTol>.5% }
RawCHS=8894/15/63, TrkSize=0, SectSize=0, ECCbytes=0
BuffType=unknown, BuffSize=128kB, MaxMultSect=32, MultSect=32
CurCHS=8894/15/63, CurSects=1063125120, LBA=yes, LBAsects=8404830
IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2 udma0 udma1 *udma2
/dev/hdb:
Model=ST340823A, FwRev=3.39, SerialNo=7EF1TKJG
Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs RotSpdTol>.5% }
RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=0
BuffType=unknown, BuffSize=512kB, MaxMultSect=16, MultSect=16
CurCHS=16383/16/63, CurSects=-66060037, LBA=yes, LBAsects=66055248
IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2 udma0 udma1 *udma2 udma3 udma4 udma5
