On Wed, Dec 19, 2001 at 10:08:06AM +0530, Dr . Sharukh K . R . Pavri . wrote:
>Today, on booting, fsck ran automatically on maximal mount count and spewed >out the following error: > >Error reading block 426356 (Attempt to read Block from filesystem resulted in >short read) while doing inode scan. This happens here also on the email server. The machine if not shut down properly starts fsck (RH 6.2). And at the same block it gives error and drops me to the shell. Even after maximum count is reached when it starts fsck it drops to the shell which is very frustrating. Even after giving fsck -y /dev/hda1 it continues because on the prompt ignore ? it says yes and next time the story repeats. Peace -- Rajesh : ####[ Linux One Stanza Tip (LOST) ]########################### Sub : Changing 80x25 on console LOST #068 To change console from default 80x25, experiment with various settings in /etc/TextConfig. You need to have "svgatextmode" package installed fo that. It will work on console only ... It will not work under X (i.e. xterm or rxvt). Try: SVGATextMode 80x30x9 ####<[EMAIL PROTECTED]>#################################### : _______________________________________________ linux-india-help mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/linux-india-help
