Hi all we have a problem with squid(based on RedHat 7.1) runnnig on IBM netfinity 1000.THE SERVER has got 2 network cards(ee100 and dlink).
we assigned a class c address to eth0 and a class B to eth1.eth1 is connected to LAN and eth0 to router..which inturn is connected to VSNL(ISP). We are able to access internet from the above server by using �lynx www.yahoo.com command� , but when we specify the class B address in the client PC browser and try to browse net it displays an error saying DNS server has refused to perform the operation. I think is not mandatory to configure DNS server in order to make squid work,all you require is to specify ISP's VSNL DNS addresses using linuxconf. Earlier i had implemented squid on a Compaq PC with a single network card having the above two addresses.. 203.X.Y.Z was the original address and assigned 172�.. Using �ifconfig eth0:1 172.16.1.1 netmask 255.255.0.0�. What I suspect is that the server is able to receive the requests from clients (by looking at the squid logs) , but we are unsure whether it is able to forward the request to the VSNL servers� Something to do with Communication between two cards��this is not the case when you are browsing internet from the server itself.it is using eth0 to browse the net. Squid configuration is fine.problem appears to be with routing. Enabled IP forwarding on the server. can some one help me in solving the problem.correct me if my workflow is wrong. Thanks and regards, Bhaskar __________________________________________________ Do You Yahoo!? Great stuff seeking new owners in Yahoo! Auctions! http://auctions.yahoo.com _______________________________________________ linux-india-help mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/linux-india-help
