Hi I have a problem in using squid on a server having two network cards(intel and dlink).The server is IBM netfinity 1000 running on RedHat linux 7.1. Configured two NIC's in the following manner.
eth0: 203.x.y.z nm 255.255.255.240 eth1: 172.16.1.1 nm 255.255.0.0 DNS server addresses are mentioned using linuxconf. Now eth0 is connected to the router and eth1 to the LAN.Clents are configured with eth1(proxy) address and port number 3128 in their browser(IE).when we try to access net from the client it displays an error "name server has refused to perform the operation".the entries in squid.conf are fine..We are able to access net from the server(because of public IP's) but not from clients. Ip forwarding is enabled on the server.i suspect some sommunication problem between two cards... Solution tried: I have disabled eth1 and assigned class b address to eth0.the address is 172.16.1.1.the only change is that i have connected eth0 to the HUB which is connected to router.when i did this i have observed that clents are able to access internet,but this is not permanant solution.I would like to assign two IP's(Class C and B)to two cards. can anyone provide a solution to this problem. regards, Bhaskar Hyd. __________________________________________________ Do You Yahoo!? Great stuff seeking new owners in Yahoo! Auctions! http://auctions.yahoo.com _______________________________________________ linux-india-help mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/linux-india-help
