Hi, Here is a peculier problem. I have a US Robotics 33.6 modem using which I had configured the email server with Red Hat Linux 6.2. Now I have installed PCQLinux 7.1 on the same machine and wvdial, minicom all give me the same problem. The modem is not initialising. However the same modem is working at present on the NT Server.
Here is what I get : -------------------------------------------------------------------------- [root@ho /root]# wvdialconf /etc/wvdial.conf Scanning your serial ports for a modem. Port Scan<*1>: Ignoring ttyS0 because /dev/mouse is a link to it. ttyS1<*1>: ATQ0 V1 E1 -- ATQ0 V1 E1 ttyS1<*1>: ATQ0 V1 E1 -- ATQ0 V1 E1 ttyS1<*1>: ATQ0 V1 E1 -- ATQ0 V1 E1 ttyS1<*1>: nothing. Port Scan<*1>: S2 S3 S4 S5 S6 S7 S8 S9 Port Scan<*1>: S10 S11 S12 S13 S14 S15 S16 S17 Port Scan<*1>: S18 S19 S20 S21 S22 S23 S24 S25 Port Scan<*1>: S26 S27 S28 S29 S30 S31 SA0 SA1 Port Scan<*1>: SA2 SC0 SC1 SC2 SC3 SI0 SI1 SI2 Port Scan<*1>: SI3 SI4 SI5 SI6 SI7 SI8 SI9 SI10 Port Scan<*1>: SI11 SI12 SI13 SI14 SI15 SR0 SR1 SR2 Port Scan<*1>: SR3 SR4 SR5 SR6 SR7 SR8 SR9 SR10 Port Scan<*1>: SR11 SR12 SR13 SR14 SR15 SR16 SR17 SR18 Port Scan<*1>: SR19 SR20 SR21 SR22 SR23 SR24 SR25 SR26 Port Scan<*1>: SR27 SR28 SR29 SR30 SR31 SR256 SR257 SR258 Port Scan<*1>: SR259 SR260 SR261 SR262 SR263 SR264 SR265 SR266 Port Scan<*1>: SR267 SR268 SR269 SR270 SR271 SR272 SR273 SR274 Port Scan<*1>: SR275 SR276 SR277 SR278 SR279 SR280 SR281 SR282 Port Scan<*1>: SR283 SR284 SR285 SR286 SR287 Sorry, no modem was detected! Is it in use by another program? Did you configure it properly with setserial? Please read the FAQ at http://www.worldvisions.ca/wvdial/ If you still have problems, send mail to [EMAIL PROTECTED] -------------------------------------------------------------------------- /var/log/messages gives the following : -------------------------------------------------------------------------- Feb 27 16:27:57 ho modprobe: modprobe: Can't locate module char-major-204 Feb 27 16:27:57 ho last message repeated 6 times Feb 27 16:27:57 ho modprobe: modprobe: Can't locate module char-major-174 Feb 27 16:27:58 ho last message repeated 15 times Feb 27 16:27:58 ho modprobe: modprobe: Can't locate module char-major-154 Feb 27 16:27:58 ho last message repeated 31 times Feb 27 16:27:58 ho modprobe: modprobe: Can't locate module char-major-156 Feb 27 16:27:59 ho last message repeated 31 times -------------------------------------------------------------------------- I had done the custom installation of PCQLinux 7.1. What the above error message indicate ? What could have gone wrong. -------------------------------------------------------------------------- [root@ho /root]# dmesg |grep tty ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS01 at 0x02f8 (irq = 3) is a 16550A -------------------------------------------------------------------------- Has anybody faced this problem with PCQLinux 7.1 and wvdial ? Thanks in advance. Peace -- Rajesh : ####[ Linux One Stanza Tip (LOST) ]########################### Sub : Knowing your IDE HDD parameters LOST #226 To know the IDE hard disk identification info which was found by the kernel at boot time, inclusive of things like the model serial number, as root try: #hdparm -i /dev/hdx (where x is a, b, c etc). ####<[EMAIL PROTECTED]>#################################### : _______________________________________________ linux-india-help mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/linux-india-help
