>>>>> "Philip" == Philip S Tellis <Philip> writes:
Philip> On Sun, 13 Oct 2002, Shyam Kumar wrote:
>> I use an internal modem (a local make) , on Windows , it sits
>> on COM2, but when I tried to make wvdialconf look at /dev/ttyS1
>> I get an Input/Output error. Then I try :
>>
>> #setserial /dev/ttyS1 /dev/ttyS1, UART: unknown, Port: 0x02f8,
>> IRQ: 3
Philip> Ok, we can safely say that this is *not* a winmodem as
Philip> winmodems do not connect to com ports.
Want to bet? I have 2 COM ports (S0 and S1) and...
[root@mail ~]# setserial /dev/ttyS3
/dev/ttyS3, UART: unknown, Port: 0x02e8, IRQ: 3
Quite likely IS a winmodem.
Philip> What you can do, is check that the Port and IRQ seen by
Philip> linux are the same as seen by windows. Maybe you'll have
Philip> to change some settings in isapnp or something.
Regards,
-- Raju
--
Raju Mathur [EMAIL PROTECTED] http://kandalaya.org/
It is the mind that moves
-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf
_______________________________________________
linux-india-help mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/linux-india-help
