Would it be possible to get feedback on this patch that just adds a
new DID_VID please?

-Jett


On Wed, Jun 26, 2024 at 8:03 AM Jett Rink <[email protected]> wrote:
>
> I wanted to check the status of this review. Is there something I did
> incorrectly?
>
> -Jett
>
> On Mon, Jun 10, 2024 at 1:25 PM Jett Rink <[email protected]> wrote:
> >
> > Accept another DID:VID for the next generation Google TPM. This TPM
> > has the same Ti50 firmware and fulfills the same interface.
> >
> > Signed-off-by: Jett Rink <[email protected]>
> > ---
> >
> >  drivers/char/tpm/tpm_tis_i2c_cr50.c | 11 ++++++++---
> >  1 file changed, 8 insertions(+), 3 deletions(-)
> >
> > diff --git a/drivers/char/tpm/tpm_tis_i2c_cr50.c 
> > b/drivers/char/tpm/tpm_tis_i2c_cr50.c
> > index 86c9a1a43adb..d9b6abdcda5f 100644
> > --- a/drivers/char/tpm/tpm_tis_i2c_cr50.c
> > +++ b/drivers/char/tpm/tpm_tis_i2c_cr50.c
> > @@ -32,7 +32,8 @@
> >  #define TPM_CR50_TIMEOUT_SHORT_MS      2               /* Short timeout 
> > during transactions */
> >  #define TPM_CR50_TIMEOUT_NOIRQ_MS      20              /* Timeout for TPM 
> > ready without IRQ */
> >  #define TPM_CR50_I2C_DID_VID           0x00281ae0L     /* Device and 
> > vendor ID reg value */
> > -#define TPM_TI50_I2C_DID_VID           0x504a6666L     /* Device and 
> > vendor ID reg value */
> > +#define TPM_TI50_DT_I2C_DID_VID                0x504a6666L     /* Device 
> > and vendor ID reg value */
> > +#define TPM_TI50_OT_I2C_DID_VID                0x50666666L     /* Device 
> > and vendor ID reg value */
> >  #define TPM_CR50_I2C_MAX_RETRIES       3               /* Max retries due 
> > to I2C errors */
> >  #define TPM_CR50_I2C_RETRY_DELAY_LO    55              /* Min usecs 
> > between retries on I2C */
> >  #define TPM_CR50_I2C_RETRY_DELAY_HI    65              /* Max usecs 
> > between retries on I2C */
> > @@ -781,13 +782,17 @@ static int tpm_cr50_i2c_probe(struct i2c_client 
> > *client)
> >         }
> >
> >         vendor = le32_to_cpup((__le32 *)buf);
> > -       if (vendor != TPM_CR50_I2C_DID_VID && vendor != 
> > TPM_TI50_I2C_DID_VID) {
> > +       if (vendor != TPM_CR50_I2C_DID_VID &&
> > +           vendor != TPM_TI50_DT_I2C_DID_VID &&
> > +           vendor != TPM_TI50_OT_I2C_DID_VID) {
> >                 dev_err(dev, "Vendor ID did not match! ID was %08x\n", 
> > vendor);
> >                 return -ENODEV;
> >         }
> >
> >         dev_info(dev, "%s TPM 2.0 (i2c 0x%02x irq %d id 0x%x)\n",
> > -                vendor == TPM_TI50_I2C_DID_VID ? "ti50" : "cr50",
> > +                vendor == TPM_CR50_I2C_DID_VID    ? "cr50" :
> > +                vendor == TPM_TI50_DT_I2C_DID_VID ? "ti50 DT" :
> > +                                                    "ti50 OT",
> >                  client->addr, client->irq, vendor >> 16);
> >         return tpm_chip_register(chip);
> >  }
> > --
> > 2.45.2.505.gda0bf45e8d-goog
> >

Reply via email to