On Wed, Feb 21, Tom Goodale wrote:
>
> Hi,
>
> I managed this, but no longer have a 600e. Have you enabled the IR-port
> in the bios ? This has to be done with a dos program; when I got my
It is really important to use this DOS program (ps2.exe) to enable IR.
Using the windows tools does not work.
Without that the driver loads correctly and everythings seems OK, but
the LED does not light bright enough. Don't know why.
> machine the ir port was disabled. Once that is done you should be able to
> use the standard instructions for SIR. At the time I didn't know enough
> (I hadn't been reading this list 8-) so never looked at getting FIR
> working.
>
> If you look back through the archives of this list you should be able to
> find a message I sent a while back with instructions on where to get the
> dos program, and a possible linux program, to activate your ir port.
You can find it in the originally installed Windows Partition. I never
would delete that completely but only make it small, because of the
nice birdy BIOS setup of this machine.
--
ciao, christian
_______________________________________________
Linux-IrDA mailing list - [EMAIL PROTECTED]
http://www.pasta.cs.UiT.No/mailman/listinfo/linux-irda
