Manuela Guandalini wrote:
now correct!!!
>
> > >
> > > Wow, i made it!!
> > > And it works great!!
> > >
> > > If you want to try it first:
> > > a) rcserial stop
> > > b) rcirda stop
> > > c) setserial /dev/ttyS2 irq3
> > > d) rcserial start
> forgotten: rcirda start
> > > e) irdadump :))
> > >
> > > If you want to let it work after booting:
> > > a) vi /etc/init.d/boot.d/S10serial
> > > b) scroll and uncomment
> > > #run_setserial /dev/ttyS2 uart 16450 port 0x3E8 irq 4
> > > c) change it to
> > > run_setserial /dev/ttyS2 uart 16550A port 0x3E8 irq 3
> > > d) be happy, it works.
> > >
> > > You can start irda afterwards e.g.
> > > ln -s /etc/init.d/irda /etc/init.d/boot.d/S11irda
> > >
> > > If u do it with
> > > yast or
> > > vi /etc/rc.config
> > > IRDA_START = yes
> > > IRDA_PORT = /dev/ttyS2
> > > are right.
> > >
> > > What can u do with it?
> > > to take datas from Handtop (PalmVx)
> > > pilot-xfer -p /dev/ircomm0 -l and whatever u need from pilot-xfer.
> > >
> > > I bet u can make a lot more.
> > >
> > > Since StarOffice and jpilot both are based on pilot-xfer, they will work
> > > with the device option /dev/ircomm0 too.
> > >
> > > Hope it can help.
> > > Manu.
Sorry, bye.
Manuela Guandalini wrote:
>
> So Leute,
> hier die Ergebnisse einer lange und anstrengende Suche nach ein IrDA
> Loesung fuer unsere COMPAQ/Palm-Verbindung. Habt viel Spass damit.
> Uebersetzung werde ich aber jetzt nicht machen, ko? :))
> Ciao. Manu.
>
> Manuela Guandalini wrote:
> >
> > Wow, i made it!!
> > And it works great!!
> >
> > If you want to try it first:
> > a) rcserial stop
> > b) rcirda stop
> > c) setserial /dev/ttyS2 irq3
> > d) rcserial start
forgotten: rcirda start
> > e) irdadump :))
> >
> > If you want to let it work after booting:
> > a) vi /etc/init.d/boot.d/S10serial
> > b) scroll and uncomment
> > #run_setserial /dev/ttyS2 uart 16450 port 0x3E8 irq 4
> > c) change it to
> > run_setserial /dev/ttyS2 uart 16550A port 0x3E8 irq 3
> > d) be happy, it works.
> >
> > You can start irda afterwards e.g.
> > ln -s /etc/init.d/irda /etc/init.d/boot.d/S11irda
> >
> > If u do it with
> > yast or
> > vi /etc/rc.config
> > IRDA_START = yes
> > IRDA_PORT = /dev/ttyS2
> > are right.
> >
> > What can u do with it?
> > to take datas from Handtop (PalmVx)
> > pilot-xfer -p /dev/ircomm0 -l and whatever u need from pilot-xfer.
> >
> > I bet u can make a lot more.
> >
> > Since StarOffice and jpilot both are based on pilot-xfer, they will work
> > with the device option /dev/ircomm0 too.
> >
> > Hope it can help.
> > Manu.
begin:vcard
n:Guandalini;Manuela
x-mozilla-html:FALSE
org:SuSE LINUX Solutions AG;Consulting
adr:;;;;;;
version:2.1
email;internet:[EMAIL PROTECTED]
x-mozilla-cpt:;-13440
fn:Manuela Guandalini
end:vcard
begin:vcard
n:Guandalini;Manuela
x-mozilla-html:FALSE
org:SuSE LINUX Solutions AG;Consulting
adr:;;;;;;
version:2.1
email;internet:[EMAIL PROTECTED]
x-mozilla-cpt:;-13440
fn:Manuela Guandalini
end:vcard
