Christian Zoz wrote:
>
> Hi Manu,
>
> On Thu, Mar 22, Manuela Guandalini wrote:
> > Wow, i made it!!
> > And it works great!!
> >
> > If you want to try it first:
> > a) rcserial stop
> > b) rcirda stop
> > c) setserial /dev/ttyS2 irq3
Attention: ^^^^
should be: irq 3
sorry.
> > d) rcserial start
> > e) irdadump :))
>
> Geht es hier um SIR? Ich dachte das ginge auf den Teilen out of the
> box. Kann man da im BIOS-Stup irgendetaws verändern?
>
no, i tried, and i found no way to manipulate the values directly from
bios setup. In my notebook i really haven't so many options free. Do u?
> >
> > If you want to let it work after booting:
> > a) vi /etc/init.d/boot.d/S10serial
> > b) scroll and uncomment
> > #run_setserial /dev/ttyS2 uart 16450 port 0x3E8 irq 4
> > c) change it to
> > run_setserial /dev/ttyS2 uart 16550A port 0x3E8 irq 3
> > d) be happy, it works.
> >
> > You can start irda afterwards e.g.
> > ln -s /etc/init.d/irda /etc/init.d/boot.d/S11irda
>
> Sollen wir in Zukunft irda immer nach serial starten?
> Das sollte eigntlich keine Probleme machen. Ich werde ein "Requires:
> serial" einbauen.
>
?? Do u mean, if we will always use IrDA as serial device?
No, it's not forever, but we will start our IrDA serial so long as a new
device module smc_ircc isn't ready or somebody tells me, how to make it
work without irattach /dev/ttyS2 -s!!
> Hast Du auch FIR getestet? Oder irgendwelche Erfolge mit irlan oder
> irnet gehabt? (Ich erwarte hier kein ja ;) )
I read somewhere (http://irda.sourceforge.net/status.html)
FIR support (4Mbps)
SMC IrCC chipset (nearly finished!)
i didn't use my irda device to connect with other pcs, not yet, i just
transferred my palm data on the notebook and vice versa, but i would
like to try it. I just don't have so much time.
> --
>
> ciao, christian
ciao, manu.
_______________________________________________
Linux-IrDA mailing list - [EMAIL PROTECTED]
http://www.pasta.cs.UiT.No/mailman/listinfo/linux-irda
