kernel 2.4.13-pre5 CONFIG_IRDA=m CONFIG_IRCOMM=m CONFIG_IRTTY_SIR=m CONFIG_IRPORT_SIR=m CONFIG_SMC_IRCC_FIR=m
simulacron:/home/aj# modprobe smc-ircc simulacron:/home/aj# lsmod Module Size Used by smc-ircc 6432 0 (unused) irport 4560 0 [smc-ircc] irda 77664 0 [smc-ircc irport] found SMC SuperIO Chip (devid=0x0b rev=00 base=0x03f0): FDC37N972 SMC IrDA Controller found IrCC version 2.0, firport 0x280, sirport 0x2f8 dma=4, irq=3 IrDA: Registered device irda0 # irattach irda0 -s 1 spurious 8259A interrupt: IRQ7. ircc_net_open(), unable to allocate DMA=4 irdadump shows nothing. serial is compiled as module and not loaded. the machine is a dell latitude c600, the bios is set to COM2 and FAST IRDA. irda is working under win 2k, so there is no hardware issue. with some other kernels and lot�s of try&error i got irda sometimes to the point, where irdadump shows the announcement of the machine itself, but i never see the announcement of my other irda device (siemens s35i cellular phone). any idea what i should do ? or is there any patch i should try ? regards, andreas _______________________________________________ Linux-IrDA mailing list - [EMAIL PROTECTED] http://www.pasta.cs.UiT.No/mailman/listinfo/linux-irda
