I'm having a hard time getting things working with with either my palm or a zaurus 5500
here is some info ive got things configured for fast IR com4 in bios (i've also tried slow ir) i'm running debian woody with 2.4.18 and this kernel config # # IrDA (infrared) support # CONFIG_IRDA=m CONFIG_IRLAN=m CONFIG_IRNET=m CONFIG_IRCOMM=m CONFIG_IRDA_ULTRA=y CONFIG_IRDA_CACHE_LAST_LSAP=y CONFIG_IRDA_FAST_RR=y CONFIG_IRDA_DEBUG=y # # Infrared-port device drivers # CONFIG_IRTTY_SIR=m CONFIG_IRPORT_SIR=m # CONFIG_DONGLE is not set # CONFIG_USB_IRDA is not set # CONFIG_NSC_FIR is not set # CONFIG_WINBOND_FIR is not set # CONFIG_TOSHIBA_FIR is not set CONFIG_SMC_IRCC_FIR=m # CONFIG_ALI_FIR is not set # CONFIG_VLSI_FIR is not set lsmod says Module Size Used by Tainted: PF irtty 7456 2 (autoclean) ircomm-tty 30240 0 (autoclean) ircomm 13180 0 (autoclean) [ircomm-tty] irda 142444 1 (autoclean) [irtty ircomm-tty ircomm] bwlang@bwlnote:~$ cat /proc/net/irda/irlap irlap0 state: LAP_NDM device name: irda0, hardware name: ttyS3 caddr: 0xb2, saddr: 0x6f6177a1, daddr: 0x000000 win size: 0, win: 0, line capacity: 0, bytes left: 0 tx queue len: 0 win queue len: 0 rbusy: FALSE mbusy: FALSE retrans: 0 vs: 0 vr: 0 va: 0 qos bps maxtt dsize winsize addbofs mintt ldisc comp tx 9600 0 64 1 12 0 0 rx 9600 0 64 1 12 0 0 irdadump says 15:46:00.927366 xid:cmd 6f6177a1 > ffffffff S=6 s=0 (14) 15:46:01.017365 xid:cmd 6f6177a1 > ffffffff S=6 s=1 (14) 15:46:01.107368 xid:cmd 6f6177a1 > ffffffff S=6 s=2 (14) 15:46:01.197365 xid:cmd 6f6177a1 > ffffffff S=6 s=3 (14) 15:46:01.287312 xid:cmd 6f6177a1 > ffffffff S=6 s=4 (14) 15:46:01.377309 xid:cmd 6f6177a1 > ffffffff S=6 s=5 (14) 15:46:01.467312 xid:cmd 6f6177a1 > ffffffff S=6 s=* bwlnote hint=0400 [ Computer ] (23) but does not change when i bring active irda devices into range here is the kernel output Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS03 at 0x02e8 (irq = 3) is a 16550A any suggestions welcome - i posted the same problems back in september and dag said he'd not yet figured out how to get things working on the i4000 (which he has too) Has there been a change or am i doing something wrong? thanks! brad _______________________________________________ Linux-IrDA mailing list - [EMAIL PROTECTED] http://www.pasta.cs.UiT.No/mailman/listinfo/linux-irda
