On Mon, 2002-04-22 at 18:37, Karl E. Jorgensen wrote: > On Mon, Apr 22, 2002 at 12:26:41PM -0400, Bradley W. Langhorst wrote: > > I'm having a hard time getting things working with with either my palm > > or a zaurus 5500 > > > > here is some info > > ive got things configured for fast IR com4 in bios > > (i've also tried slow ir) >
> In the bios: Which serial port is the infrared set to ? Mine is set to > com2: > $ setserial /dev/ttyS1 > /dev/ttyS1, UART: 16550A, Port: 0x02f8, IRQ: 3, Flags: low_latency > sorry - thought i mentioned that i've set it to com4 in the bios (and high speed) > > I'm running 2.2.19 (upgrading requires a reboot :-) on my i4000, but > irda seems to be working fine for me. Same modules loaded as you; only > slow IR. FIR seems doomed as findchip can't see the chip :-( slow ir is sufficient for what i need. but did you configure the bios with fast or slow ir? > Except when in connection with suspend/resume. After a resume, irda > would stop working, where the symptoms would be one of: > - *no* irdadump output > - or irdadump not reporting any incoming transmissions, but showing > outboing "i-am-here's" hmm sounds like what i'm seeing - i'll try this after a reboot thanks for the response! brad _______________________________________________ Linux-IrDA mailing list - [EMAIL PROTECTED] http://www.pasta.cs.UiT.No/mailman/listinfo/linux-irda
