SIR will be ok. Does irport act as device ? should I do a setserial /dev/ttyS1 uart none port 0 modprobe irport irq=10 io=0x2f8 irattach /dev/ttyS1 -s
? The existiting ttyS0 is the real serial port, because i used it for my modem. [EMAIL PROTECTED] schrieb am 03.05.02: > On Fri, May 03, 2002 at 11:40:41AM +0200, [EMAIL PROTECTED] wrote: > > > > [E/A] > > ... > > x02F8 - x02FF Toshiba FIR Anschlusstyp-U > > > > [IRQs] > > ... > > 10 Toshiba FIR Anschlusstyp-U > > > > Anyone some ideas to complete my confusion ? > > Try using irport with the above settings, making sure to do > setserial /dev/ttySn uart none port 0 > for the serial port, if it's available. > > Have you verified that ttyS0 is NOT the IrDA port? > > Irport will only run in SIR mode, but if it works, it's better than nothing. > > > //Peter > _______________________________________________ > Linux-IrDA mailing list - [EMAIL PROTECTED] > http://www.pasta.cs.UiT.No/mailman/listinfo/linux-irda ________________________________________________________________ Keine verlorenen Lotto-Quittungen, keine vergessenen Gewinne mehr! Beim WEB.DE Lottoservice: http://tippen2.web.de/?x=13 _______________________________________________ Linux-IrDA mailing list - [EMAIL PROTECTED] http://www.pasta.cs.UiT.No/mailman/listinfo/linux-irda
