On 15 Sep 1999, Dag Brattli wrote:
> Justin Cormack <[EMAIL PROTECTED]> writes:
>
> > >
> > > Hi
> > >
> > > I've seen in the HOWTO that it is possible to use more than one ir device
> > > at the same time, I'm having some trouble with this. I'm using
> > > linux-2.2.12+irda3 and irda-utils-0.9.4. I have a tekram dongle and a
> > > built-in ir-port on a Dell Latitude (some years old). Both devices work
> > > well one at a time but when I try to do 'irattach' on a second device the
> > > message 'tcsetaddr: Input/output error' shows in the log (right after
> > > 'serial connection established').
> > >
oops, I'm really sorry, the Linux-IrDA stuff works just great. I didn't
realize that my network card conflicted with one of the serial port irq:s.
When I disabled the network card it worked right away.
Is it possible to assign a /dev/ircomm* device to one ir-port ? I would
like to make it possible to establish a ppp connection on both of my
ir-ports. Now, when I run a pppd it makes the connection (ex ppp0 <-->
ircomm0 ) no matter which (phisical) ir-port I'm using.
/tomas
_______________________________________________
Linux-IrDA mailing list - [EMAIL PROTECTED]
http://www.pasta.cs.UiT.No/mailman/listinfo/linux-irda
