I got ircomm working with my Libretto 100CT using a Toshoboe by loading
ircomm and using /dev/irnine.

So try "insmod ircomm" and try talking to the S25 via /dev/irnine.

This worked enough for me to hotsync my Palmpilot using PalmOS 3.3.

David Fullagar wrote:
> 
> I'm having problems with configuring SIR mode on a Toshiba 3010CT
> (using 2.2.13 kernel with irda patch 7, and irda-utils 0.9.5, on a
> base RH6.1 system).  dmesg isn't giving a ttyS? virtual serial port
> for IR.  Using the toshoboe module and "ifconfig irda0 up" can get
> this log message:
> 
>   ToshOboe: Found 701 chip at 0xffc0 irq 11
> 
> and with irmanager get the S25 discovered in
> /proc/net/irda/discovery.  I have this in /etc/conf.modules:
> 
>   alias char-major-161 ircomm-tty
>   alias tty-ldisc-11 irtty
> 
> And load in ircomm-tty, etc. without problems (but
> /proc/net/irda/ircomm just says "Instance 0:").
> 
> However I can't seem to find out (or understand) the correct call with
> irattach (as I don't seem to have a ttyS? for ir) so that I can use
> gsmlib and ppp.  Or can these use the FIR mode directly -- and how?
> 
> I have these devices setup:
> 
> crw-r--r--   1 root     root     161,   0 Nov 28 17:45 /dev/ircomm0
> crw-r--r--   1 root     root     161,   1 Nov 28 17:45 /dev/ircomm1
> 
> Thanks,
> 
> -David.
> 
> --
> David Fullagar  <[EMAIL PROTECTED]>
> 
> _______________________________________________
> Linux-IrDA mailing list  -  [EMAIL PROTECTED]
> http://www4.pasta.cs.UiT.No/mailman/listinfo/linux-irda

Regards, 

Paul

http://www.geocities.com/~paulbristow
ICQ# 11965223
[EMAIL PROTECTED]
/* With Linux, Java and my Palm, I'm ready to face the day. */

_______________________________________________
Linux-IrDA mailing list  -  [EMAIL PROTECTED]
http://www4.pasta.cs.UiT.No/mailman/listinfo/linux-irda

Reply via email to