I have for testing Tekram IRmate 210 dongle, Tekram IRmate 210B dongle,
HP 5MP, HP 2100M, HP4050N printers.
I found no difference between 210 (old model, without diode) and 210B dongles.
Tested on 2.2.14, patch 2.2.14-irda1 (serial; modules irda, ircomm, irlan,
irtty, irport, tekram dongle, irda debug), irda utils 0.9.5 on Debian 2.2.
---
insmod irda
insmod irtty
insmod tekram
insmod ircomm
insmod ircomm-tty
insmod irlan
echo 1 > /proc/sys/net/irda/debug
irattach /dev/ttyS0 -d tekram
---
Link between Tekram dongles - they found each other [LAN], irdaping did not
work (but irdadump on the other computer showed communication). No success
in LAN connection {ifconfig irda0 host1 pointopoint host2;
route add -host host2 dev irda0} - should it work? Is it right way?
Printing Tekram -> HP5MP is OK, -> HP2100M also OK, -> HP4050N does not work
(discovery works, irdaping works, printing does not). Has anybody HP4050N
working via IRDA?
The print speed of 2.5MB file on Tekram <-> HP5MP was 1850 bytes/seconds.
Isn't it slow?
Thank you.
More info on request.
Vladislav Cerny
<[EMAIL PROTECTED]>
_______________________________________________
Linux-IrDA mailing list - [EMAIL PROTECTED]
http://www4.pasta.cs.UiT.No/mailman/listinfo/linux-irda
