Reinhold Schoeb <[EMAIL PROTECTED]> writes:
> Did everything you mentioned above. I got a problem to compile the
> irdadump part of irda-utils-0.9.7. The ./configure script gives me
> the following error message :
>
> creating cache ./config.cache
> ./configure: line 524: syntax error near unexpected token `AM_INIT_AUTOMAKE(libi
> rdadump,'
> ./configure: line 524: `AM_INIT_AUTOMAKE(libirdadump, 0.1)'
Guess you don't have the latest tools like automake, autoconf, libtool
etc. I'm using:
automake-1.4
autoconf-2.14
libtool-1.3.3
> > BTW: Are you sure the Newton supports IrCOMM? It doesn't give any hints
> > about it! Maybe you need to start something on the Newton to make it
> > activate its IrCOMM protocol?
>
> Unfortunately I have no informations about the IrDA protocols used
> by the Newton. The problem is that Apple stopped the development and
> there are no informations available.
>
> The only informations I have is a report by Bill Moser that he was
> able to connect a Newton by IrDA to a Mac, using some Palm utilities.
>
> If you have some time, can you please have a look at
>
> http://misf67.cern.ch/~steve/sloup/connect.htm#IrDA
>
> Perhaps youll see which protocol is used and what I have to select
> with Linux-IrDA.
I think I would first try to print from the Newton to Linux. Try to do
something like this (using Linux-2.2.14-irda1)
1. cat /dev/irlpt0 > newton.out
2. print something from the Newton to Linux
3. cat newton.out
4. check if what you received was the same thing as you sent.
PS. /dev/irlpt0 should look like this:
crw-r--r-- 1 root 161, 16 Nov 5 08:36 /dev/irlpt0
-- Dag
--
/ Dag Brattli | The Linux-IrDA Project /
// University of Tromsoe, Norway | Infrared communication for Linux //
/// http://www.cs.uit.no/~dagb | http://www.cs.uit.no/linux-irda/ ///
_______________________________________________
Linux-IrDA mailing list - [EMAIL PROTECTED]
http://www4.pasta.cs.UiT.No/mailman/listinfo/linux-irda
