On Sat, 03 Jun 2000 22:29:53 +0100, you wrote:
> David Sheldon wrote:
> >
> > On Fri, Jun 02, 2000 at 01:26:52AM +0200, Dag Brattli wrote:
> > > Hi,
> > >
> > > You don't need this code since the BIOS will do it for you! But you must
> > > however specify which transceiver to use as a module parameter. Anybody
> > > who knows which transceiver the Vaio is using?
> >
> > Yes, my N505X is working using the following (but with 2.2.15pre5)
> >
> > options nsc-ircc dongle_id=0x09
> > alias irda0 nsc-ircc
> >
> > I am sure this is in the list archives.
>
> Yes I had already tried this.
>
> Seems to me that the 2.2.14 kernel with irda pach seems to work if I do
> a modprobe but not if I insmod the irda and nsc_fir seperatly?
You don't need a patched 2.2.14. You need a patched 2.2.15! The
module is then called nsc-ircc and not nsc_fir. And you're right that
insmod does not use the module parameters
-- Dag
_______________________________________________
Linux-IrDA mailing list - [EMAIL PROTECTED]
http://www4.pasta.cs.UiT.No/mailman/listinfo/linux-irda
