On l�r, dec 23, 2000 at 11:56:28 +0100, Listuser AVA System wrote:
> I really need some help. Been trying for a while.
> I have a Asus l8400 with a NSC,PC87338,11.2,0x398,0x2f8,0x2f8,3,3,1,0,1
> according to findchip.
>
> The serial driver finds it as ttyS1.
> The NSC driver won't load since the serial driver got there first.
> But since I will use it to connect my cell phone I thought it won't
> matter.
>
> I compiled 2.2.18, the latest patch won't compile (gcc 2.95.2)
>
> >From what I understood from the docs all I should have to do after making
> the dev nodes and adding to modules.conf was :
> modpobe ircomm-tty
> irttatch /dev/ttyS1 -s
I think you are missing some modules that are needed..
try running lsmod and make sure you have irda, ircomm,irtty and ircomm-tty
then run irattach /dev/ttyS1 -s 1
that works for me.. (Dell Inspiron 7500, SMC chip)
> Running minicom on /dev/ircomm0 does not seem to do anything..
> Stays offline. My cell phone is a nokia 8210, which is supposed to have a
> "good ir port".
have you check /proc/net/irda/discovery?
if you see a entry for a nokia phone, then the connection is ok..
then just hope your phone works, and that you have everything you need, like data
capabilites etc.
> Have I gone blind and missed something obvious ?
>
> I have tried some different settings in bios for the ir port. setting it
> to SIR and so on..
>
> //Peter Hellman
>
> _______________________________________________
> Linux-IrDA mailing list - [EMAIL PROTECTED]
> http://www.pasta.cs.UiT.No/mailman/listinfo/linux-irda
>
good luck..
--
/Johan
___________________________________________
This ought to be filled with personal stuff
_______________________________________________
Linux-IrDA mailing list - [EMAIL PROTECTED]
http://www.pasta.cs.UiT.No/mailman/listinfo/linux-irda
