Hi,
> Sent: Saturday, October 17, 2015 10:48 AM
>
> Hi,
>
> On Tuesday 13 October 2015 03:52 PM, Yoshihiro Shimoda wrote:
> > To use the channel 0 of R-Car gen3 as periperal mode, This patch changes
> > the mode to OTG instead of HOST. Then, this driver needs to set some
> > registers to enable host mode and detects ID pin and VBUS pin at
> > phy_init() timing.
> >
> > For now, the channel 0 can be used as host mode only.
> >
> > Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda...@renesas.com>
> > ---
> > drivers/phy/phy-rcar-gen3-usb2.c | 126
> > ++++++++++++++++++++++++++++++++++++++-
> > 1 file changed, 124 insertions(+), 2 deletions(-)
> >
> > diff --git a/drivers/phy/phy-rcar-gen3-usb2.c
> > b/drivers/phy/phy-rcar-gen3-usb2.c
> > index d90dfcf..03d7079 100644
> > --- a/drivers/phy/phy-rcar-gen3-usb2.c
> > +++ b/drivers/phy/phy-rcar-gen3-usb2.c
> > @@ -25,6 +25,10 @@
> > #define USB2_USBCTR 0x00c
> > #define USB2_SPD_RSM_TIMSET 0x10c
> > #define USB2_OC_TIMSET 0x110
> > +#define USB2_COMMCTRL 0x600
> > +#define USB2_VBCTRL 0x60c
> > +#define USB2_LINECTRL1 0x610
> > +#define USB2_ADPCTRL 0x630
> >
> > /* INT_ENABLE */
> > #define USB2_INT_ENABLE_USBH_INTB_EN BIT(2)
> > @@ -42,6 +46,24 @@
> > /* OC_TIMSET */
> > #define USB2_OC_TIMSET_INIT 0x000209ab
> >
> > +/* COMMCTRL */
> > +#define USB2_COMMCTRL_OTG_PERI BIT(31) /* 1 = Peripheral mode
> > */
> > +
> > +/* VBCTRL */
> > +#define USB2_VBCTRL_DRVVBUSSEL BIT(8)
> > +
> > +/* LINECTRL1 */
> > +#define USB2_LINECTRL1_DPRPD_EN BIT(19)
> > +#define USB2_LINECTRL1_DP_RPD BIT(18)
> > +#define USB2_LINECTRL1_DMRPD_EN BIT(17)
> > +#define USB2_LINECTRL1_DM_RPD BIT(16)
> > +
> > +/* ADPCTRL */
> > +#define USB2_ADPCTRL_OTGSESSVLD BIT(20)
> > +#define USB2_ADPCTRL_IDDIG BIT(19)
> > +#define USB2_ADPCTRL_IDPULLUP BIT(5) /* 1 = ID sampling is
> > enabled */
> > +#define USB2_ADPCTRL_DRVVBUS BIT(4)
> > +
> > /******* HSUSB registers (original offset is +0x100) *******/
> > #define HSUSB_LPSTS 0x02
> > #define HSUSB_UGCTRL2 0x84
> > @@ -68,6 +90,104 @@ struct rcar_gen3_chan {
> > spinlock_t lock;
> > };
> >
> > +static void rcar_gen3_set_host_mode(struct rcar_gen3_chan *ch, int host)
> > +{
> > + void __iomem *usb2_base = ch->usb2.base;
> > + u32 tmp = readl(usb2_base + USB2_COMMCTRL);
>
> It's your preference but I'd like to have something like val instead of tmp.
I got it. I will change the name.
> > +
> > + dev_dbg(&ch->phy->dev, "%s: %08x, %d\n", __func__, tmp, host);
>
> This shoulod be dev_vdbg.
I got it. I will fix it.
> > + if (host)
> > + tmp &= ~USB2_COMMCTRL_OTG_PERI;
> > + else
> > + tmp |= USB2_COMMCTRL_OTG_PERI;
> > + writel(tmp, usb2_base + USB2_COMMCTRL);
> > +}
> > +
> > +static void rcar_gen3_set_linectrl(struct rcar_gen3_chan *ch, int dp, int
> > dm)
> > +{
> > + void __iomem *usb2_base = ch->usb2.base;
> > + u32 tmp = readl(usb2_base + USB2_LINECTRL1);
> > +
> > + dev_dbg(&ch->phy->dev, "%s: %08x, %d, %d\n", __func__, tmp, dp, dm);
>
> same here.
I got it.
> > + tmp &= ~(USB2_LINECTRL1_DP_RPD | USB2_LINECTRL1_DM_RPD);
> > + if (dp)
> > + tmp |= USB2_LINECTRL1_DP_RPD;
> > + if (dm)
> > + tmp |= USB2_LINECTRL1_DM_RPD;
> > + writel(tmp, usb2_base + USB2_LINECTRL1);
> > +}
> > +
> > +static void rcar_gen3_enable_vbus_ctrl(struct rcar_gen3_chan *ch, int vbus)
> > +{
> > + void __iomem *usb2_base = ch->usb2.base;
> > + u32 tmp = readl(usb2_base + USB2_ADPCTRL);
> > +
> > + dev_dbg(&ch->phy->dev, "%s: %08x, %d\n", __func__, tmp, vbus);
>
> here too.
I will fix it.
> > + if (vbus)
> > + tmp |= USB2_ADPCTRL_DRVVBUS;
> > + else
> > + tmp &= ~USB2_ADPCTRL_DRVVBUS;
> > + writel(tmp, usb2_base + USB2_ADPCTRL);
> > +}
> > +
> > +static void rcar_gen3_init_for_host(struct rcar_gen3_chan *ch)
> > +{
> > + rcar_gen3_set_linectrl(ch, 1, 1);
> > + rcar_gen3_set_host_mode(ch, 1);
> > + rcar_gen3_enable_vbus_ctrl(ch, 1);
> > +}
> > +
> > +static void rcar_gen3_init_for_peri(struct rcar_gen3_chan *ch)
> > +{
> > + rcar_gen3_set_linectrl(ch, 0, 1);
> > + rcar_gen3_set_host_mode(ch, 0);
> > + rcar_gen3_enable_vbus_ctrl(ch, 0);
> > +}
> > +
> > +static bool rcar_gen3_check_vbus(struct rcar_gen3_chan *ch)
> > +{
> > + return !!(readl(ch->usb2.base + USB2_ADPCTRL) &
> > + USB2_ADPCTRL_OTGSESSVLD);
> > +}
> > +
> > +static bool rcar_gen3_check_id(struct rcar_gen3_chan *ch)
> > +{
> > + return !!(readl(ch->usb2.base + USB2_ADPCTRL) & USB2_ADPCTRL_IDDIG);
> > +}
> > +
> > +static void rcar_gen3_device_recognition(struct rcar_gen3_chan *ch)
> > +{
> > + bool is_host = true;
> > +
> > + if (rcar_gen3_check_id(ch)) {
> > + /* B-device? */
> > + if (rcar_gen3_check_vbus(ch))
>
> This can be rcar_gen3_check_id(ch) && rcar_gen3_check_vbus(ch) no?
Thank you for the point. I will change such a condition.
Best regards,
Yoshihiro Shimoda
> Thanks
> Kishon
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
