I think that comment "Currently supported enable-method is psci v0.2" is a statement of intent, not what is available currently. And the only plan I am aware of is PSCI with UEFI based firmware.
U-boot is a key firmware platform for us and has no PSCI implementation available. So, we need this. The device tree simply describes the hardware that is there and that's what this patch exposes. If down the road all firmware provides a PSCI based reset interface then we will naturally use that. But we need something in the meantime to let us reboot the system. Thanks, Stuart > -----Original Message----- > From: Mark Rutland [mailto:mark.rutl...@arm.com] > Sent: Tuesday, October 27, 2015 11:35 AM > To: Rivera Jose-B46482 > Cc: robh...@kernel.org; devicet...@vger.kernel.org; > linux-arm-ker...@lists.infradead.org; linux- > ker...@vger.kernel.org; Sharma Bhupesh-B45370; Yoder Stuart-B08248; Li > Yang-Leo-R58472 > Subject: Re: [PATCH] arm64: dts: Added syscon-reboot node for FSL's LS2085A > SoC > > On Fri, Oct 23, 2015 at 08:31:20PM -0500, J. German Rivera wrote: > > Added sys-reboot node to the FSL's LS2085A SoC DT to leverage > > the ARM-generic reboot mechanism for this SoC. This mechanism > > is enabled through CONFIG_POWER_RESET_SYSCON. > > Per the comments in arch/arm64/boot/dts/freescale/fsl-ls2085a.dtsi, the > platform has PSCI 0.2+, and therefore already has system reset > functionality. > > Given that, why is this necessary? > > Thanks, > Mark. > > > Signed-off-by: J. German Rivera <german.riv...@freescale.com> > > --- > > arch/arm64/boot/dts/freescale/fsl-ls2085a.dtsi | 12 ++++++++++++ > > 1 file changed, 12 insertions(+) > > > > diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2085a.dtsi > > b/arch/arm64/boot/dts/freescale/fsl- > ls2085a.dtsi > > index e281ceb..6f82163 100644 > > --- a/arch/arm64/boot/dts/freescale/fsl-ls2085a.dtsi > > +++ b/arch/arm64/boot/dts/freescale/fsl-ls2085a.dtsi > > @@ -131,6 +131,18 @@ > > interrupts = <1 9 0x4>; > > }; > > > > + rst_ccsr: rstccsr@1E60000 { > > + compatible = "syscon"; > > + reg = <0x0 0x1E60000 0x0 0x10000>; > > + }; > > + > > + reboot@65024000 { > > + compatible ="syscon-reboot"; > > + regmap = <&rst_ccsr>; > > + offset = <0x0>; > > + mask = <0x2>; > > + }; > > + > > timer { > > compatible = "arm,armv8-timer"; > > interrupts = <1 13 0x8>, /* Physical Secure PPI, active-low */ > > -- > > 2.3.3 > > -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
