On Mon, Nov 09, 2015 at 11:13:31AM +0100, Sascha Hauer wrote: > This adds the device tree binding documentation for the mediatek thermal > controller found on Mediatek MT8173 and other SoCs. > > Signed-off-by: Sascha Hauer <[email protected]> > Reviewed-by: Daniel Kurtz <[email protected]>
Acked-by: Rob Herring <[email protected]> > --- > .../bindings/thermal/mediatek-thermal.txt | 43 > ++++++++++++++++++++++ > 1 file changed, 43 insertions(+) > create mode 100644 > Documentation/devicetree/bindings/thermal/mediatek-thermal.txt > > diff --git a/Documentation/devicetree/bindings/thermal/mediatek-thermal.txt > b/Documentation/devicetree/bindings/thermal/mediatek-thermal.txt > new file mode 100644 > index 0000000..81f9a51 > --- /dev/null > +++ b/Documentation/devicetree/bindings/thermal/mediatek-thermal.txt > @@ -0,0 +1,43 @@ > +* Mediatek Thermal > + > +This describes the device tree binding for the Mediatek thermal controller > +which measures the on-SoC temperatures. This device does not have its own > ADC, > +instead it directly controls the AUXADC via AHB bus accesses. For this reason > +this device needs phandles to the AUXADC. Also it controls a mux in the > +apmixedsys register space via AHB bus accesses, so a phandle to the > APMIXEDSYS > +is also needed. > + > +Required properties: > +- compatible: "mediatek,mt8173-thermal" > +- reg: Address range of the thermal controller > +- interrupts: IRQ for the thermal controller > +- clocks, clock-names: Clocks needed for the thermal controller. required > + clocks are: > + "therm": Main clock needed for register access > + "auxadc": The AUXADC clock > +- resets: Reference to the reset controller controlling the thermal > controller. > +- mediatek,auxadc: A phandle to the AUXADC which the thermal controller uses > +- mediatek,apmixedsys: A phandle to the APMIXEDSYS controller. > +- #thermal-sensor-cells : Should be 0. See ./thermal.txt for a description. > + > +Optional properties: > +- nvmem-cells: A phandle to the calibration data provided by a nvmem device. > If > + unspecified default values shall be used. > +- nvmem-cell-names: Should be "calibration-data" > + > +Example: > + > + thermal: thermal@1100b000 { > + #thermal-sensor-cells = <1>; > + compatible = "mediatek,mt8173-thermal"; > + reg = <0 0x1100b000 0 0x1000>; > + interrupts = <0 70 IRQ_TYPE_LEVEL_LOW>; > + clocks = <&pericfg CLK_PERI_THERM>, <&pericfg CLK_PERI_AUXADC>; > + clock-names = "therm", "auxadc"; > + resets = <&pericfg MT8173_PERI_THERM_SW_RST>; > + reset-names = "therm"; > + mediatek,auxadc = <&auxadc>; > + mediatek,apmixedsys = <&apmixedsys>; > + nvmem-cells = <&thermal_calibration_data>; > + nvmem-cell-names = "calibration-data"; > + }; > -- > 2.6.1 > -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
