From: Thomas Abraham <[email protected]> For Exynos5420 platforms, add CPU operating points and CPU regulator supply properties for migrating from Exynos specific cpufreq driver to using generic cpufreq driver.
Changes by Bartlomiej: - split Exynos5420 support from the original patch Changes by Ben Gamari: - Port to operating-points-v2 Cc: Kukjin Kim <[email protected]> Cc: Doug Anderson <[email protected]> Cc: Javier Martinez Canillas <[email protected]> Cc: Andreas Faerber <[email protected]> Cc: Sachin Kamat <[email protected]> Cc: Thomas Abraham <[email protected]> Cc: Bartlomiej Zolnierkiewicz <[email protected]> Signed-off-by: Bartlomiej Zolnierkiewicz <[email protected]> Signed-off-by: Ben Gamari <[email protected]> --- arch/arm/boot/dts/exynos5420.dtsi | 122 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 122 insertions(+) diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi index 1b3d6c7..262a7d8 100644 --- a/arch/arm/boot/dts/exynos5420.dtsi +++ b/arch/arm/boot/dts/exynos5420.dtsi @@ -50,6 +50,116 @@ usbdrdphy1 = &usbdrd_phy1; }; + cpu0_opp_table: opp_table0 { + compatible = "operating-points-v2"; + opp-shared; + opp00 { + opp-hz = /bits/ 64 <1800000000>; + opp-microvolt = <1250000>; + clock-latency-ns = <140000>; + }; + opp01 { + opp-hz = /bits/ 64 <1700000000>; + opp-microvolt = <1212500>; + clock-latency-ns = <140000>; + }; + opp02 { + opp-hz = /bits/ 64 <1600000000>; + opp-microvolt = <1175000>; + clock-latency-ns = <140000>; + }; + opp03 { + opp-hz = /bits/ 64 <1500000000>; + opp-microvolt = <1137500>; + clock-latency-ns = <140000>; + }; + opp04 { + opp-hz = /bits/ 64 <1400000000>; + opp-microvolt = <1112500>; + clock-latency-ns = <140000>; + }; + opp05 { + opp-hz = /bits/ 64 <1300000000>; + opp-microvolt = <1062500>; + clock-latency-ns = <140000>; + }; + opp06 { + opp-hz = /bits/ 64 <1200000000>; + opp-microvolt = <1037500>; + clock-latency-ns = <140000>; + }; + opp07 { + opp-hz = /bits/ 64 <1100000000>; + opp-microvolt = <1012500>; + clock-latency-ns = <140000>; + }; + opp08 { + opp-hz = /bits/ 64 <1000000000>; + opp-microvolt = < 987500>; + clock-latency-ns = <140000>; + }; + opp09 { + opp-hz = /bits/ 64 <900000000>; + opp-microvolt = < 962500>; + clock-latency-ns = <140000>; + }; + opp10 { + opp-hz = /bits/ 64 <800000000>; + opp-microvolt = < 937500>; + clock-latency-ns = <140000>; + }; + opp11 { + opp-hz = /bits/ 64 <700000000>; + opp-microvolt = < 912500>; + clock-latency-ns = <140000>; + }; + }; + + cpu1_opp_table: opp_table1 { + compatible = "operating-points-v2"; + opp-shared; + opp00 { + opp-hz = /bits/ 64 <1300000000>; + opp-microvolt = <1275000>; + clock-latency-ns = <140000>; + }; + opp01 { + opp-hz = /bits/ 64 <1140000000>; + opp-microvolt = <1212500>; + clock-latency-ns = <140000>; + }; + opp02 { + opp-hz = /bits/ 64 <1100000000>; + opp-microvolt = <1162500>; + clock-latency-ns = <140000>; + }; + opp03 { + opp-hz = /bits/ 64 <1000000000>; + opp-microvolt = <1112500>; + clock-latency-ns = <140000>; + }; + opp04 { + opp-hz = /bits/ 64 <900000000>; + opp-microvolt = <1062500>; + clock-latency-ns = <140000>; + }; + opp05 { + opp-hz = /bits/ 64 <800000000>; + opp-microvolt = <1025000>; + clock-latency-ns = <140000>; + }; + opp06 { + opp-hz = /bits/ 64 <700000000>; + opp-microvolt = <975000>; + clock-latency-ns = <140000>; + }; + opp07 { + opp-hz = /bits/ 64 <600000000>; + opp-microvolt = <937500>; + clock-latency-ns = <140000>; + }; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -58,8 +168,11 @@ device_type = "cpu"; compatible = "arm,cortex-a15"; reg = <0x0>; + clocks = <&clock CLK_ARM_CLK>; + clock-names = "cpu-cluster.0"; clock-frequency = <1800000000>; cci-control-port = <&cci_control1>; + operating-points-v2 = <&cpu0_opp_table>; }; cpu1: cpu@1 { @@ -68,6 +181,7 @@ reg = <0x1>; clock-frequency = <1800000000>; cci-control-port = <&cci_control1>; + operating-points-v2 = <&cpu0_opp_table>; }; cpu2: cpu@2 { @@ -76,6 +190,7 @@ reg = <0x2>; clock-frequency = <1800000000>; cci-control-port = <&cci_control1>; + operating-points-v2 = <&cpu0_opp_table>; }; cpu3: cpu@3 { @@ -84,14 +199,18 @@ reg = <0x3>; clock-frequency = <1800000000>; cci-control-port = <&cci_control1>; + operating-points-v2 = <&cpu0_opp_table>; }; cpu4: cpu@100 { device_type = "cpu"; compatible = "arm,cortex-a7"; reg = <0x100>; + clocks = <&clock CLK_KFC_CLK>; + clock-names = "cpu-cluster.1"; clock-frequency = <1000000000>; cci-control-port = <&cci_control0>; + operating-points-v2 = <&cpu1_opp_table>; }; cpu5: cpu@101 { @@ -100,6 +219,7 @@ reg = <0x101>; clock-frequency = <1000000000>; cci-control-port = <&cci_control0>; + operating-points-v2 = <&cpu1_opp_table>; }; cpu6: cpu@102 { @@ -108,6 +228,7 @@ reg = <0x102>; clock-frequency = <1000000000>; cci-control-port = <&cci_control0>; + operating-points-v2 = <&cpu1_opp_table>; }; cpu7: cpu@103 { @@ -116,6 +237,7 @@ reg = <0x103>; clock-frequency = <1000000000>; cci-control-port = <&cci_control0>; + operating-points-v2 = <&cpu1_opp_table>; }; }; -- 2.6.2 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
