V2 bindings have better support for clock-latency and voltage-tolerance
and doesn't need special care. To use callbacks, like
dev_pm_opp_get_max_{transition|volt}_latency(), irrespective of the
bindings, the core needs to know clock-latency/voltage-tolerance for the
earlier bindings.This patch reads clock-latency/voltage-tolerance from the device node, irrespective of the bindings (to keep it simple) and use them only for V1 bindings. Signed-off-by: Viresh Kumar <[email protected]> Reviewed-by: Stephen Boyd <[email protected]> --- drivers/base/power/opp/core.c | 20 ++++++++++++++++++++ drivers/base/power/opp/opp.h | 6 ++++++ 2 files changed, 26 insertions(+) diff --git a/drivers/base/power/opp/core.c b/drivers/base/power/opp/core.c index b0f5c72f0fc3..4fafa733a1c7 100644 --- a/drivers/base/power/opp/core.c +++ b/drivers/base/power/opp/core.c @@ -582,6 +582,7 @@ static struct device_opp *_add_device_opp(struct device *dev) { struct device_opp *dev_opp; struct device_list_opp *list_dev; + struct device_node *np; /* Check for existing list for 'dev' first */ dev_opp = _find_device_opp(dev); @@ -604,6 +605,21 @@ static struct device_opp *_add_device_opp(struct device *dev) return NULL; } + /* + * Only required for backward compatibility with v1 bindings, but isn't + * harmful for other cases. And so we do it unconditionally. + */ + np = of_node_get(dev->of_node); + if (np) { + u32 val; + + if (!of_property_read_u32(np, "clock-latency", &val)) + dev_opp->clock_latency_ns_max = val; + of_property_read_u32(np, "voltage-tolerance", + &dev_opp->voltage_tolerance_v1); + of_node_put(np); + } + srcu_init_notifier_head(&dev_opp->srcu_head); INIT_LIST_HEAD(&dev_opp->opp_list); @@ -861,6 +877,7 @@ static int _opp_add_v1(struct device *dev, unsigned long freq, long u_volt, { struct device_opp *dev_opp; struct dev_pm_opp *new_opp; + unsigned long tol; int ret; /* Hold our list modification lock here */ @@ -874,7 +891,10 @@ static int _opp_add_v1(struct device *dev, unsigned long freq, long u_volt, /* populate the opp table */ new_opp->rate = freq; + tol = u_volt * dev_opp->voltage_tolerance_v1 / 100; new_opp->u_volt = u_volt; + new_opp->u_volt_min = u_volt - tol; + new_opp->u_volt_max = u_volt + tol; new_opp->available = true; new_opp->dynamic = dynamic; diff --git a/drivers/base/power/opp/opp.h b/drivers/base/power/opp/opp.h index 416293b7da23..fe44beb404ba 100644 --- a/drivers/base/power/opp/opp.h +++ b/drivers/base/power/opp/opp.h @@ -138,6 +138,8 @@ struct device_list_opp { * @dentry: debugfs dentry pointer of the real device directory (not links). * @dentry_name: Name of the real dentry. * + * @voltage_tolerance_v1: In percentage, for v1 bindings only. + * * This is an internal data structure maintaining the link to opps attached to * a device. This structure is not meant to be shared to users as it is * meant for book keeping and private to OPP library. @@ -156,6 +158,10 @@ struct device_opp { struct device_node *np; unsigned long clock_latency_ns_max; + + /* For backward compatibility with v1 bindings */ + unsigned int voltage_tolerance_v1; + bool shared_opp; struct dev_pm_opp *suspend_opp; -- 2.7.1.370.gb2aa7f8
