Le 14/03/2016 21:22, Alexandre Belloni a écrit :
> On 10/03/2016 at 16:37:40 +0100, Nicolas Ferre wrote :
>> +ATMEL AT91 Alternative Shutdown Controller
>
> Can't that be sama5d2 instead of alternative?
>
>> +M: Nicolas Ferre <[email protected]>
>> +S: Supported
>> +F: drivers/power/reset/at91-shdwc.c
>
> I would also use that in the filename. Because once there is a third
> shdwc, I'm not sure how you will be able to name it.
>
>> +config POWER_RESET_AT91_SHDWC
>
> I would also include that in the config name.
>
>> + tristate "Atmel AT91 shutdown controller driver"
>> + depends on ARCH_AT91 || COMPILE_TEST
>> + default SOC_SAMA5
>> + help
>> + This driver supports the alternate shutdown controller for some Atmel
>> + SAMA5 SoCs. It is present for example on SAMA5D2 SoC.
>> +
>
>> +#include <linux/clk.h>
>> +#include <linux/io.h>
>> +#include <linux/module.h>
>> +#include <linux/of.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/printk.h>
>> +
>> +#define SLOW_CLOCK_FREQ 32768
>> +
>> +#define AT91_SHDW_CR 0x00 /* Shut Down Control Register */
>> +#define AT91_SHDW_SHDW BIT(0) /* Shut Down
>> command */
>> +#define AT91_SHDW_KEY (0xa5UL << 24) /* KEY Password
>> */
>> +
>> +#define AT91_SHDW_MR 0x04 /* Shut Down Mode Register */
>> +#define AT91_SHDW_WKUPDBC_SHIFT 24
>> +#define AT91_SHDW_WKUPDBC_MASK GENMASK(31, 16)
>> +#define AT91_SHDW_WKUPDBC(x) (((x) << AT91_SHDW_WKUPDBC_SHIFT) \
>> + & AT91_SHDW_WKUPDBC_MASK)
>> +
>> +#define AT91_SHDW_SR 0x08 /* Shut Down Status Register */
>> +#define AT91_SHDW_WKUPIS_SHIFT 16
>> +#define AT91_SHDW_WKUPIS_MASK GENMASK(31, 16)
>> +#define AT91_SHDW_WKUPIS(x) ((1 << (x)) << AT91_SHDW_WKUPIS_SHIFT \
>> + & AT91_SHDW_WKUPIS_MASK)
>> +
>> +#define AT91_SHDW_WUIR 0x0c /* Shutdown Wake-up Inputs
>> Register */
>> +#define AT91_SHDW_WKUPEN_MASK GENMASK(15, 0)
>> +#define AT91_SHDW_WKUPEN(x) ((1 << (x)) & AT91_SHDW_WKUPEN_MASK)
>> +#define AT91_SHDW_WKUPT_SHIFT 16
>> +#define AT91_SHDW_WKUPT_MASK GENMASK(31, 16)
>> +#define AT91_SHDW_WKUPT(x) ((1 << (x)) << AT91_SHDW_WKUPT_SHIFT \
>> + & AT91_SHDW_WKUPT_MASK)
>> +
>> +#define SHDW_WK_PIN(reg, cfg) ((reg) &
>> AT91_SHDW_WKUPIS((cfg)->wkup_pin_input))
>> +#define SHDW_RTCWK(reg, cfg) (((reg) >> ((cfg)->sr_rtcwk_shift)) &
>> 0x1)
>> +#define SHDW_RTCWKEN(cfg) (1 << ((cfg)->mr_rtcwk_shift))
>> +
>> +#define DBC_PERIOD_US(x) DIV_ROUND_UP_ULL((1000000 * (x)), \
>> + SLOW_CLOCK_FREQ)
>> +
>> +struct shdwc_config {
>> + u8 wkup_pin_input;
>> + u8 mr_rtcwk_shift;
>> + u8 sr_rtcwk_shift;
>> +};
>> +
>> +struct shdwc {
>> + struct shdwc_config *cfg;
>> + void __iomem *at91_shdwc_base;
>> +};
>> +
>> +/*
>> + * Hold configuration here, cannot be more than one instance of the driver
>> + * since pm_power_off itself is global.
>> + */
>> +static struct shdwc *at91_shdwc;
>> +static struct clk *sclk;
>> +
>> +static const unsigned long long sdwc_dbc_period[] = {
>> + 0, 3, 32, 512, 4096, 32768,
>> +};
>> +
>> +static void __init at91_wakeup_status(struct platform_device *pdev)
>> +{
>> + struct shdwc *shdw = platform_get_drvdata(pdev);
>> + u32 reg;
>> + char *reason = "unknown";
>> +
>> + reg = readl(shdw->at91_shdwc_base + AT91_SHDW_SR);
>> +
>> + dev_dbg(&pdev->dev, "%s: status = %#x\n", __func__, reg);
>> +
>> + /* Simple power-on, just bail out */
>> + if (!reg)
>> + return;
>> +
>> + if (SHDW_WK_PIN(reg, shdw->cfg))
>> + reason = "WKUP pin";
>> + else if (SHDW_RTCWK(reg, shdw->cfg))
>> + reason = "RTC";
>> +
>> + pr_info("AT91: Wake-Up source: %s\n", reason);
>> +}
>> +
>> +static void at91_poweroff(void)
>> +{
>> + writel(AT91_SHDW_KEY | AT91_SHDW_SHDW,
>> + at91_shdwc->at91_shdwc_base + AT91_SHDW_CR);
>
> This is still not properly aligned :)
Ok for this one.
>> +}
>> +
>> +static u32 at91_shdwc_debouncer_value(struct platform_device *pdev,
>> + u32 in_period_us)
>> +{
>> + int i;
>> + int max_idx = ARRAY_SIZE(sdwc_dbc_period) - 1;
>> + unsigned long long period_us;
>> + unsigned long long max_period_us =
>> DBC_PERIOD_US(sdwc_dbc_period[max_idx]);
>> +
>> + if (in_period_us > max_period_us) {
>> + dev_warn(&pdev->dev,
>> + "debouncer period %u too big, reduced to %llu us\n",
>> + in_period_us, max_period_us);
>> + return max_idx;
>> + }
>> +
>> + for (i = max_idx - 1; i > 0; i--) {
>> + period_us = DBC_PERIOD_US(sdwc_dbc_period[i]);
>> + dev_dbg(&pdev->dev, "%s: ref[%d] = %llu\n",
>> + __func__, i, period_us);
>
> Alignment is not correct.
>
>> + if (in_period_us > period_us)
>> + break;
>> + }
>> +
>> + return i + 1;
>> +}
>> +
>> +static u32 at91_shdwc_get_wakeup_input(struct platform_device *pdev,
>> + struct device_node *np)
>> +{
>> + struct device_node *cnp;
>> + u32 wk_input_mask;
>> + u32 wuir = 0;
>> + u32 wk_input;
>> +
>> + for_each_child_of_node(np, cnp) {
>> + if (of_property_read_u32(cnp, "reg", &wk_input)) {
>> + dev_warn(&pdev->dev, "reg property is missing for %s\n",
>> + cnp->full_name);
>> + continue;
>> + }
>> +
>> + wk_input_mask = 1 << wk_input;
>> + if (!(wk_input_mask & AT91_SHDW_WKUPEN_MASK)) {
>> + dev_warn(&pdev->dev,
>> + "wake-up input %d out of bounds ignore\n",
>> + wk_input);
>> + continue;
>> + }
>> + wuir |= wk_input_mask;
>> +
>> + if (of_property_read_bool(cnp, "atmel,wakeup-active-high"))
>> + wuir |= AT91_SHDW_WKUPT(wk_input);
>> +
>> + dev_dbg(&pdev->dev, "%s: (child %d) wuir = %#x\n",
>> + __func__, wk_input, wuir);
>
> Alignment is not correct
I don't agree with you on the 2 last ones. In Documentation/CodingStyle,
it is said that:
"Chapter 2: Breaking long lines and strings
[..]
Descendants are always substantially shorter than the parent and
are placed substantially to the right."
Together with the 80 column requirement that I also fulfil, I think that
my code is well aligned.
So I keep it like this ;-)
Bye,
--
Nicolas Ferre
