- Remove unneeded leds0 alias. - Switch to bcm6345-l1-intc interrupt controller. - Use interrupt-controller instead of periph_intc. - Add uart1, ehci0 and ohci0 nodes. - Refactor syscon and syscon-reboot.
Signed-off-by: Álvaro Fernández Rojas <[email protected]> --- arch/mips/boot/dts/brcm/bcm6328.dtsi | 44 +++++++++++++++++++++++++++++------- 1 file changed, 36 insertions(+), 8 deletions(-) diff --git a/arch/mips/boot/dts/brcm/bcm6328.dtsi b/arch/mips/boot/dts/brcm/bcm6328.dtsi index 9d19236..8efa420 100644 --- a/arch/mips/boot/dts/brcm/bcm6328.dtsi +++ b/arch/mips/boot/dts/brcm/bcm6328.dtsi @@ -31,8 +31,8 @@ }; aliases { - leds0 = &leds0; uart0 = &uart0; + uart1 = &uart1; }; cpu_intc: cpu_intc { @@ -50,16 +50,16 @@ compatible = "simple-bus"; ranges; - periph_intc: periph_intc@10000020 { - compatible = "brcm,bcm3380-l2-intc"; - reg = <0x10000024 0x4 0x1000002c 0x4>, - <0x10000020 0x4 0x10000028 0x4>; + periph_intc: interrupt-controller@10000020 { + compatible = "brcm,bcm6345-l1-intc"; + reg = <0x10000020 0x10>, + <0x10000030 0x10>; interrupt-controller; #interrupt-cells = <1>; interrupt-parent = <&cpu_intc>; - interrupts = <2>; + interrupts = <2>, <3>; }; uart0: serial@10000100 { @@ -71,13 +71,22 @@ status = "disabled"; }; - timer: timer@10000040 { + uart1: serial@10000120 { + compatible = "brcm,bcm6345-uart"; + reg = <0x10000120 0x18>; + interrupt-parent = <&periph_intc>; + interrupts = <39>; + clocks = <&periph_clk>; + status = "disabled"; + }; + + timer: syscon@10000040 { compatible = "syscon"; reg = <0x10000040 0x2c>; native-endian; }; - reboot { + reboot: syscon-reboot@10000068 { compatible = "syscon-reboot"; regmap = <&timer>; offset = <0x28>; @@ -91,5 +100,24 @@ reg = <0x10000800 0x24>; status = "disabled"; }; + + ehci0: usb@10002500 { + compatible = "brcm,bcm6328-ehci", "generic-ehci"; + reg = <0x10002500 0x100>; + big-endian; + interrupt-parent = <&periph_intc>; + interrupts = <42>; + status = "disabled"; + }; + + ohci0: usb@10002600 { + compatible = "brcm,bcm6328-ohci", "generic-ohci"; + reg = <0x10002600 0x100>; + big-endian; + no-big-frame-no; + interrupt-parent = <&periph_intc>; + interrupts = <41>; + status = "disabled"; + }; }; }; -- 2.1.4
