- Remove unneeded leds0 alias. - Switch to bcm6345-l1-intc interrupt controller. - Use interrupt-controller instead of periph_intc. - Add uart1 node.
Signed-off-by: Álvaro Fernández Rojas <[email protected]> --- arch/mips/boot/dts/brcm/bcm6368.dtsi | 21 +++++++++++++++------ 1 file changed, 15 insertions(+), 6 deletions(-) diff --git a/arch/mips/boot/dts/brcm/bcm6368.dtsi b/arch/mips/boot/dts/brcm/bcm6368.dtsi index 1f6b9b5..75aba97 100644 --- a/arch/mips/boot/dts/brcm/bcm6368.dtsi +++ b/arch/mips/boot/dts/brcm/bcm6368.dtsi @@ -32,8 +32,8 @@ }; aliases { - leds0 = &leds0; uart0 = &uart0; + uart1 = &uart1; }; cpu_intc: cpu_intc { @@ -64,16 +64,16 @@ mask = <0x1>; }; - periph_intc: periph_intc@10000020 { - compatible = "brcm,bcm3380-l2-intc"; - reg = <0x10000024 0x4 0x1000002c 0x4>, - <0x10000020 0x4 0x10000028 0x4>; + periph_intc: interrupt-controller@10000020 { + compatible = "brcm,bcm6345-l1-intc"; + reg = <0x10000020 0x10>, + <0x10000030 0x10>; interrupt-controller; #interrupt-cells = <1>; interrupt-parent = <&cpu_intc>; - interrupts = <2>; + interrupts = <2>, <3>; }; leds0: led-controller@100000d0 { @@ -93,6 +93,15 @@ status = "disabled"; }; + uart1: serial@10000120 { + compatible = "brcm,bcm6345-uart"; + reg = <0x10000120 0x18>; + interrupt-parent = <&periph_intc>; + interrupts = <3>; + clocks = <&periph_clk>; + status = "disabled"; + }; + ehci0: usb@10001500 { compatible = "brcm,bcm6368-ehci", "generic-ehci"; reg = <0x10001500 0x100>; -- 2.1.4
