Hi Soren, > -----Original Message----- > From: Sören Brinkmann [mailto:[email protected]] > Sent: Wednesday, April 20, 2016 7:58 PM > To: Appana Durga Kedareswara Rao <[email protected]> > Cc: [email protected]; [email protected]; [email protected]; > [email protected]; [email protected]; Michal Simek > <[email protected]>; [email protected]; [email protected]; > Appana Durga Kedareswara Rao <[email protected]>; > [email protected]; [email protected]; > [email protected]; Anirudha Sarangi <[email protected]>; Punnaiah > Choudary Kalluri <[email protected]>; Shubhrajyoti Datta > <[email protected]>; [email protected]; linux-arm- > [email protected]; [email protected]; > [email protected] > Subject: Re: [PATCH v2 1/2] Documentation: DT: vdma: Add clock support for > vdma > > On Wed, 2016-04-20 at 17:13:18 +0530, Kedareswara rao Appana wrote: > > This patch updates the binding doc with clock description for vdma. > > > > Signed-off-by: Kedareswara rao Appana <[email protected]> > > --- > > Changes for v2: > > --> Listed down all the clocks supported by the h/w > > as suggested by the Datta. > > --> Used IP clock names instead of shortcut clock names. > > > > Documentation/devicetree/bindings/dma/xilinx/xilinx_vdma.txt | 8 > > ++++++++ > > 1 file changed, 8 insertions(+) > > > > diff --git > > a/Documentation/devicetree/bindings/dma/xilinx/xilinx_vdma.txt > > b/Documentation/devicetree/bindings/dma/xilinx/xilinx_vdma.txt > > index fcc2b65..afe9eb7 100644 > > --- a/Documentation/devicetree/bindings/dma/xilinx/xilinx_vdma.txt > > +++ b/Documentation/devicetree/bindings/dma/xilinx/xilinx_vdma.txt > > @@ -21,6 +21,11 @@ Required properties: > > - dma-channel child node: Should have at least one channel and can have up > to > > two channels per device. This node specifies the properties of each > > DMA channel (see child node properties below). > > +- clocks: Input clock specifier. Refer to common clock bindings. > > +- clock-names: List of input clocks "s_axi_lite_aclk", "m_axi_mm2s_aclk" > > + "m_axi_s2mm_aclk", "m_axis_mm2s_aclk", "s_axis_s2mm_aclk" > > + (list of input cloks may vary based on the ip configuration. > > s/cloks/clocks
Ok will fix in next version... > > Acked-by: Sören Brinkmann <[email protected]> Thanks for the ack... Regards, Kedar. > > Sören
