On Tue, May 17, 2016 at 07:22AM, Scott Wood wrote: > -----Original Message----- > From: Scott Wood [mailto:o...@buserror.net] > Sent: Tuesday, May 17, 2016 7:22 AM > To: Qiang Zhao <qiang.z...@nxp.com> > Cc: robh...@kernel.org; devicet...@vger.kernel.org; linux- > ker...@vger.kernel.org; Xiaobo Xie <xiaobo....@nxp.com>; Yang-Leo Li > <leoyang...@nxp.com>; linuxppc-...@lists.ozlabs.org > Subject: Re: [v5,1/7] QE: Add IC, SI and SIRAM document to device tree > bindings. > > On Wed, Mar 09, 2016 at 09:21:28AM +0800, Zhao Qiang wrote: > > Add IC, SI and SIRAM document of QE to > > Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/qe.txt > > > > Signed-off-by: Zhao Qiang <qiang.z...@nxp.com> > > Acked-by: Rob Herring <r...@kernel.org> > > --- > > changes for v2 > > - Add interrupt-controller in Required properties > > - delete address-cells and size-cells for qe-si and qe-siram Changes > > for v3 > > - Add SoC specific caompatible strings to qe-si and qe-siram Changes > > for v4 > > - NA > > Changes for v5 > > - NA > > > > .../devicetree/bindings/powerpc/fsl/cpm_qe/qe.txt | 50 > > ++++++++++++++++++++++ > > 1 file changed, 50 insertions(+) > > +* Serial Interface Block (SI) > > + > > +The SI manages the routing of eight TDM lines to the QE block serial > > +drivers , the MCC and the UCCs, for receive and transmit. > > + > > +Required properties: > > +- compatible : should be "fsl,t1040-qe-si". > > +- reg : Address range of SI register set. > > Is t1040 the only chip that has or will ever have this?
There also be t1024 and ls1043 supporting si. I thought to add them when adding their device node. If you think it is better to add them now, I will modify. -Zhao Qiang
