On 16 June 2016 at 04:37, Sudeep Holla <[email protected]> wrote: > This series add support for SCPI based device device power state > management using genpd. > > Regards, > Sudeep > > v1[1]->v2: > - Fixed the endianness handling in scpi_device_get_power_state > as spotted by Tixy > - Renamed scpi_pd.c to scpi_pm_domain.c as suggested by Ulf > - Added Mark's ack on DT binding > > [1] https://marc.info/?l=linux-kernel&m=146522850003483&w=2 > > Sudeep Holla (3): > firmware: arm_scpi: add support for device power state management > Documentation: add DT bindings for ARM SCPI power domains > firmware: scpi: add device power domain support using genpd > > Documentation/devicetree/bindings/arm/arm,scpi.txt | 34 +++++ > drivers/firmware/Kconfig | 9 ++ > drivers/firmware/Makefile | 1 + > drivers/firmware/arm_scpi.c | 30 ++++ > drivers/firmware/scpi_pm_domain.c | 152 > +++++++++++++++++++++ > include/linux/scpi_protocol.h | 2 + > 6 files changed, 228 insertions(+) > create mode 100644 drivers/firmware/scpi_pm_domain.c > > -- > 2.7.4 >
For the set: Tested-by: Mathieu Poirier <[email protected]>
