The only place in the driver where RX8025_REG_* are used they are always
shifted and ORed the same way, so instead of repeating that idiom make
it a part of symbolic constant.

Signed-off-by: Andrey Smirnov <[email protected]>
---
 drivers/rtc/rtc-ds1307.c | 18 ++++++++++--------
 1 file changed, 10 insertions(+), 8 deletions(-)

diff --git a/drivers/rtc/rtc-ds1307.c b/drivers/rtc/rtc-ds1307.c
index cbbe9f0..2af9c00 100644
--- a/drivers/rtc/rtc-ds1307.c
+++ b/drivers/rtc/rtc-ds1307.c
@@ -103,9 +103,11 @@ enum ds_type {
 
 #define DS13XX_TRICKLE_CHARGER_MAGIC   0xa0
 
-#define RX8025_REG_CTRL1       0x0e
+#define RX8025_REG_CTRL1_      0x0e
+#define RX8025_REG_CTRL1       ((RX8025_REG_CTRL1_ << 4) | 0x08)
 #      define RX8025_BIT_2412          0x20
-#define RX8025_REG_CTRL2       0x0f
+#define RX8025_REG_CTRL2_      0x0f
+#define RX8025_REG_CTRL2       ((RX8025_REG_CTRL2_ << 4) | 0x08)
 #      define RX8025_BIT_PON           0x10
 #      define RX8025_BIT_VDET          0x40
 #      define RX8025_BIT_XST           0x20
@@ -1353,7 +1355,7 @@ static int ds1307_chip_configure(const struct ds1307 
*ds1307)
        }
        case rx_8025:
                tmp = i2c_smbus_read_i2c_block_data(client,
-                                                   RX8025_REG_CTRL1 << 4 | 
0x08,
+                                                   RX8025_REG_CTRL1,
                                                    2, regs);
                if (tmp != 2) {
                        dev_dbg(&client->dev, "read error %d\n", tmp);
@@ -1364,7 +1366,7 @@ static int ds1307_chip_configure(const struct ds1307 
*ds1307)
                if (!(regs[1] & RX8025_BIT_XST)) {
                        regs[1] |= RX8025_BIT_XST;
                        i2c_smbus_write_byte_data(client,
-                                                 RX8025_REG_CTRL2 << 4 | 0x08,
+                                                 RX8025_REG_CTRL2,
                                                  regs[1]);
                        dev_warn(&client->dev,
                                 "oscillator stop detected - SET TIME!\n");
@@ -1373,7 +1375,7 @@ static int ds1307_chip_configure(const struct ds1307 
*ds1307)
                if (regs[1] & RX8025_BIT_PON) {
                        regs[1] &= ~RX8025_BIT_PON;
                        i2c_smbus_write_byte_data(client,
-                                                 RX8025_REG_CTRL2 << 4 | 0x08,
+                                                 RX8025_REG_CTRL2,
                                                  regs[1]);
                        dev_warn(&client->dev, "power-on detected\n");
                }
@@ -1381,7 +1383,7 @@ static int ds1307_chip_configure(const struct ds1307 
*ds1307)
                if (regs[1] & RX8025_BIT_VDET) {
                        regs[1] &= ~RX8025_BIT_VDET;
                        i2c_smbus_write_byte_data(client,
-                                                 RX8025_REG_CTRL2 << 4 | 0x08,
+                                                 RX8025_REG_CTRL2,
                                                  regs[1]);
                        dev_warn(&client->dev, "voltage drop detected\n");
                }
@@ -1392,11 +1394,11 @@ static int ds1307_chip_configure(const struct ds1307 
*ds1307)
 
                        /* switch to 24 hour mode */
                        i2c_smbus_write_byte_data(client,
-                                                 RX8025_REG_CTRL1 << 4 | 0x08,
+                                                 RX8025_REG_CTRL1,
                                                  regs[0] | RX8025_BIT_2412);
 
                        tmp = i2c_smbus_read_i2c_block_data(client,
-                                                           RX8025_REG_CTRL1 << 
4 | 0x08,
+                                                           RX8025_REG_CTRL1,
                                                            2, regs);
                        if (tmp != 2) {
                                dev_dbg(&client->dev, "read error %d\n", tmp);
-- 
2.5.5

Reply via email to