Hello, On 25 June 2016 at 05:45, <[email protected]> wrote: > From: Ondrej Jirman <[email protected]> > > Use Xulong Orange Pi One GPIO based regulator for > passive cooling and thermal management. > > Signed-off-by: Ondrej Jirman <[email protected]> > --- > arch/arm/boot/dts/sun8i-h3-orangepi-one.dts | 39 > +++++++++++++++++++++++++++++ > 1 file changed, 39 insertions(+) > > diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts > b/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts > index b1bd6b0..a38d871 100644 > --- a/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts > +++ b/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts > @@ -109,6 +109,45 @@ > }; > }; > > +&cpu0 { > + operating-points = < > + /* kHz uV */ > + 1296000 1300000 > + 1200000 1300000
First problem is that the board boots at 1008000 which is not listed and the kernel complains. Second problem is that the board locks up during boot with this enabled. Do you have some suggestion for alternate configuration to test? Thanks Michal
