Hi
On Tue, Jun 21, 2016 at 7:54 PM, Yakir Yang <[email protected]> wrote:
> From: Mark Yao <[email protected]>
>
> Add the core display-subsystem node and the two display controllers
> available on the rk3399.
>
> Signed-off-by: Mark Yao <[email protected]>
> Signed-off-by: Yakir Yang <[email protected]>
> ---
> Changes in v3: None
> Changes in v2:
> - provide some minimal patch description (Heiko)
>
> arch/arm64/boot/dts/rockchip/rk3399.dtsi | 58
> ++++++++++++++++++++++++++++++++
> 1 file changed, 58 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi
> b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
> index 46f325a..54e5c25 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi
> +++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
> @@ -543,6 +543,64 @@
> status = "disabled";
> };
>
> + vopl: vop@ff8f0000 {
> + compatible = "rockchip,rk3399-vop-lit";
> + reg = <0x0 0xff8f0000 0x0 0x3efc>;
> + interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&cru ACLK_VOP1>, <&cru DCLK_VOP1>, <&cru HCLK_VOP1>;
> + clock-names = "aclk_vop", "dclk_vop", "hclk_vop";
Note that if this lands after Elaine / Caesar's patch ("arm64: dts:
rockchip: add the power domain node for rk3399")
<https://patchwork.kernel.org/patch/9206415/> then you need to respin
adding powerdomain references here for correctness.
If this lands before Elaine / Caesar's patch then the other patch
needs to be re-spun. ;)
> + resets = <&cru SRST_A_VOP1>, <&cru SRST_H_VOP1>, <&cru
> SRST_D_VOP1>;
> + reset-names = "axi", "ahb", "dclk";
> + iommus = <&vopl_mmu>;
> + status = "disabled";
> +
> + vopl_out: port {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> + };
> +
> + vopl_mmu: iommu@ff8f3f00 {
> + compatible = "rockchip,iommu";
> + reg = <0x0 0xff8f3f00 0x0 0x100>;
> + interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-names = "vopl_mmu";
> + #iommu-cells = <0>;
> + status = "disabled";
> + };
> +
> + vopb: vop@ff900000 {
> + compatible = "rockchip,rk3399-vop-big";
> + reg = <0x0 0xff900000 0x0 0x3efc>;
> + interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&cru ACLK_VOP0>, <&cru DCLK_VOP0>, <&cru HCLK_VOP0>;
> + clock-names = "aclk_vop", "dclk_vop", "hclk_vop";
Here too, obviously.
See <http://crosreview.com/356623> for reference.
-Doug
