On Mon, 04 Jul 2016 23:40:43 +0900,
Mark Rutland wrote:
>
> On Mon, Jul 04, 2016 at 11:26:04PM +0900, Yoshinori Sato wrote:
> > Add device proptery on enable integrated peripheral.
> > It have platform_data. But don't have devicetree.
> >
> > Signed-off-by: Yoshinori Sato <ys...@users.sourceforge.jp>
> > ---
> > .../devicetree/bindings/display/sm501fb.txt | 11 +++++++++
> > drivers/mfd/sm501.c | 28
> > +++++++++++++---------
> > 2 files changed, 28 insertions(+), 11 deletions(-)
> >
> > diff --git a/Documentation/devicetree/bindings/display/sm501fb.txt
> > b/Documentation/devicetree/bindings/display/sm501fb.txt
> > index 9d9f009..9290094 100644
> > --- a/Documentation/devicetree/bindings/display/sm501fb.txt
> > +++ b/Documentation/devicetree/bindings/display/sm501fb.txt
> > @@ -22,6 +22,17 @@ Optional properties:
> > set different foreign endian.
> > - big-endian: available on little endian systems, to
> > set different foreign endian.
> > +- smi,devices: function block enable bitmap.
> > + bit0: USB host
> > + bit1: USB slave
> > + bit2: SSP Ch0
> > + bit3: SSP Ch1
> > + bit4: UART Ch0
> > + bit5: UART Ch1
> > + bit6: Accelerator
> > + bit7: AC97
> > + bit8: I2S
> > + bit9: GPIO
>
> Generally we don't place bitmaps like this in DT.
>
> What exactly does this property represent? Whether certain sub-blocks
> are present?
>
> These should probably be separate has-${FOO} proeprties. It may be
> better to have separate nodes, if we'e going to need to refer to sub
> blocks by phandle, or are liekly to have peropties specific to a sub
> block.
Hmm...Is it so?
sm501: display@13e00000 {
compatible = "smi,sm501";
<snip>
devices = {
has-usb-host;
has-usb-target;
};
};
I'll try it.
> Thanks,
> Mark.
>
> > Example for MPC5200:
> > display@1,0 {
> > diff --git a/drivers/mfd/sm501.c b/drivers/mfd/sm501.c
> > index 65cd0d2..e8c6a5e 100644
> > --- a/drivers/mfd/sm501.c
> > +++ b/drivers/mfd/sm501.c
> > @@ -21,6 +21,7 @@
> > #include <linux/pci.h>
> > #include <linux/i2c-gpio.h>
> > #include <linux/slab.h>
> > +#include <linux/of.h>
> >
> > #include <linux/sm501.h>
> > #include <linux/sm501-regs.h>
> > @@ -1297,7 +1298,7 @@ static unsigned int sm501_mem_local[] = {
> > * Common init code for an SM501
> > */
> >
> > -static int sm501_init_dev(struct sm501_devdata *sm)
> > +static int sm501_init_dev(struct sm501_devdata *sm, unsigned int devices)
> > {
> > struct sm501_initdata *idata;
> > struct sm501_platdata *pdata;
> > @@ -1342,16 +1343,15 @@ static int sm501_init_dev(struct sm501_devdata *sm)
> > pdata = sm->platdata;
> > idata = pdata ? pdata->init : NULL;
> >
> > - if (idata) {
> > + if (idata)
> > sm501_init_regs(sm, idata);
> >
> > - if (idata->devices & SM501_USE_USB_HOST)
> > - sm501_register_usbhost(sm, &mem_avail);
> > - if (idata->devices & (SM501_USE_UART0 | SM501_USE_UART1))
> > - sm501_register_uart(sm, idata->devices);
> > - if (idata->devices & SM501_USE_GPIO)
> > - sm501_register_gpio(sm);
> > - }
> > + if (devices & SM501_USE_USB_HOST)
> > + sm501_register_usbhost(sm, &mem_avail);
> > + if (devices & (SM501_USE_UART0 | SM501_USE_UART1))
> > + sm501_register_uart(sm, devices);
> > + if (devices & SM501_USE_GPIO)
> > + sm501_register_gpio(sm);
> >
> > if (pdata && pdata->gpio_i2c != NULL && pdata->gpio_i2c_nr > 0) {
> > if (!sm501_gpio_isregistered(sm))
> > @@ -1377,6 +1377,7 @@ static int sm501_plat_probe(struct platform_device
> > *dev)
> > {
> > struct sm501_devdata *sm;
> > int ret;
> > + unsigned int devices = 0;
> >
> > sm = kzalloc(sizeof(struct sm501_devdata), GFP_KERNEL);
> > if (sm == NULL) {
> > @@ -1415,6 +1416,11 @@ static int sm501_plat_probe(struct platform_device
> > *dev)
> > }
> >
> > platform_set_drvdata(dev, sm);
> > + if (sm->platdata)
> > + devices = sm->platdata->init->devices;
> > + if (dev->dev.of_node)
> > + of_property_read_u32(dev->dev.of_node, "smi,devices",
> > + &devices);
> >
> > sm->regs = ioremap(sm->io_res->start, resource_size(sm->io_res));
> >
> > @@ -1424,7 +1430,7 @@ static int sm501_plat_probe(struct platform_device
> > *dev)
> > goto err_claim;
> > }
> >
> > - return sm501_init_dev(sm);
> > + return sm501_init_dev(sm, devices);
> >
> > err_claim:
> > release_resource(sm->regs_claim);
> > @@ -1635,7 +1641,7 @@ static int sm501_pci_probe(struct pci_dev *dev,
> > goto err4;
> > }
> >
> > - sm501_init_dev(sm);
> > + sm501_init_dev(sm, sm->platdata->init->devices);
> > return 0;
> >
> > err4:
> > --
> > 2.7.0
> >
> > --
> > To unsubscribe from this list: send the line "unsubscribe devicetree" in
> > the body of a message to majord...@vger.kernel.org
> > More majordomo info at http://vger.kernel.org/majordomo-info.html
> >
--
Yoshinori Sato
<ys...@users.sourceforge.jp>
