Hi Zubair,
On Mon, Aug 15, 2016 at 02:55:30PM +0100, Zubair Lutfullah Kakakhel wrote:
> IRQs from peripherals such as i2c/uart/ethernet come via
> the AXI Interrupt controller.
>
> Select it in Kconfig for xilfpga and add the DT node
>
> Signed-off-by: Zubair Lutfullah Kakakhel <zubair.kakak...@imgtec.com>
> ---
> arch/mips/Kconfig | 1 +
> arch/mips/boot/dts/xilfpga/nexys4ddr.dts | 12 ++++++++++++
> 2 files changed, 13 insertions(+)
>
> diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
> index 2638856..42ecf40 100644
> --- a/arch/mips/Kconfig
> +++ b/arch/mips/Kconfig
> @@ -426,6 +426,7 @@ config MACH_XILFPGA
> select SYS_SUPPORTS_ZBOOT_UART16550
> select USE_OF
> select USE_GENERIC_EARLY_PRINTK_8250
> + select XILINX_IRQ
> help
> This enables support for the IMG University Program MIPSfpga platform.
Please split dt changes from code changes.
> diff --git a/arch/mips/boot/dts/xilfpga/nexys4ddr.dts
> b/arch/mips/boot/dts/xilfpga/nexys4ddr.dts
> index 48d2112..8db660b 100644
> --- a/arch/mips/boot/dts/xilfpga/nexys4ddr.dts
> +++ b/arch/mips/boot/dts/xilfpga/nexys4ddr.dts
> @@ -17,6 +17,18 @@
> compatible = "mti,cpu-interrupt-controller";
> };
>
> + axi_intc: interrupt-controller@10200000 {
> + #interrupt-cells = <1>;
> + compatible = "xlnx,xps-intc-1.00.a";
This compatible string isn't documented, mind adding it? Please make
sure to Cc the devicetree maintainers on it.
thx,
Jason.
> + interrupt-controller;
> + reg = <0x10200000 0x10000>;
> + xlnx,kind-of-intr = <0x0>;
> + xlnx,num-intr-inputs = <0x6>;
> +
> + interrupt-parent = <&cpuintc>;
> + interrupts = <6>;
> + };
> +
> axi_gpio: gpio@10600000 {
> #gpio-cells = <1>;
> compatible = "xlnx,xps-gpio-1.00.a";
> --
> 1.9.1
>
