Hi Zubair,
On Mon, Aug 15, 2016 at 02:55:34PM +0100, Zubair Lutfullah Kakakhel wrote:
> The xilfpga platform has a Xilinx AXI emaclite block.
>
> Add the DT node to use it.
>
> Signed-off-by: Zubair Lutfullah Kakakhel <zubair.kakak...@imgtec.com>
> ---
> arch/mips/boot/dts/xilfpga/nexys4ddr.dts | 27 +++++++++++++++++++++++++++
> 1 file changed, 27 insertions(+)
>
> diff --git a/arch/mips/boot/dts/xilfpga/nexys4ddr.dts
> b/arch/mips/boot/dts/xilfpga/nexys4ddr.dts
> index 3658e21..58bc62f 100644
> --- a/arch/mips/boot/dts/xilfpga/nexys4ddr.dts
> +++ b/arch/mips/boot/dts/xilfpga/nexys4ddr.dts
> @@ -42,6 +42,33 @@
> xlnx,tri-default = <0xffffffff>;
> } ;
>
> + axi_ethernetlite: ethernet@10e00000 {
> + compatible = "xlnx,xps-ethernetlite-3.00.a";
This one also isn't documented.
> + device_type = "network";
> + interrupt-parent = <&axi_intc>;
> + interrupts = <1>;
> + local-mac-address = [08 86 4C 0D F7 09];
I'm pretty sure you don't want this in the mainline dts file.
thx,
Jason.
> + phy-handle = <&phy0>;
> + reg = <0x10e00000 0x10000>;
> + xlnx,duplex = <0x1>;
> + xlnx,include-global-buffers = <0x1>;
> + xlnx,include-internal-loopback = <0x0>;
> + xlnx,include-mdio = <0x1>;
> + xlnx,instance = "axi_ethernetlite_inst";
> + xlnx,rx-ping-pong = <0x1>;
> + xlnx,s-axi-id-width = <0x1>;
> + xlnx,tx-ping-pong = <0x1>;
> + xlnx,use-internal = <0x0>;
> + mdio {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + phy0: phy@1 {
> + device_type = "ethernet-phy";
> + reg = <1>;
> + };
> + };
> + };
> +
> axi_uart16550: serial@10400000 {
> compatible = "ns16550a";
> reg = <0x10400000 0x10000>;
> --
> 1.9.1
>
