On Sun, Aug 21, 2016 at 10:11:17AM +0800, Chen-Yu Tsai wrote: > This patch adds the basic and regulator bindings for the X-Powers AXP809 > PMIC.
Looks like you're adding the AXP806 to me. > > Signed-off-by: Chen-Yu Tsai <[email protected]> > --- > Documentation/devicetree/bindings/mfd/axp20x.txt | 28 > ++++++++++++++++++++++-- > 1 file changed, 26 insertions(+), 2 deletions(-) > > diff --git a/Documentation/devicetree/bindings/mfd/axp20x.txt > b/Documentation/devicetree/bindings/mfd/axp20x.txt > index 585a95546288..8f3ad9ab4637 100644 > --- a/Documentation/devicetree/bindings/mfd/axp20x.txt > +++ b/Documentation/devicetree/bindings/mfd/axp20x.txt > @@ -10,7 +10,8 @@ axp809 (X-Powers) > > Required properties: > - compatible: "x-powers,axp152", "x-powers,axp202", "x-powers,axp209", > - "x-powers,axp221", "x-powers,axp223", "x-powers,axp809" > + "x-powers,axp221", "x-powers,axp223", "x-powers,axp806", > + "x-powers,axp809" Reformat this to one valid combination per line. > - reg: The I2C slave address or RSB hardware address for the AXP chip > - interrupt-parent: The parent interrupt controller > - interrupts: SoC NMI / GPIO interrupt connected to the PMIC's IRQ pin > @@ -47,7 +48,6 @@ Optional properties for DCDC regulators: > probably makes sense for HiFi audio related > applications that aren't battery constrained. > > - > AXP202/AXP209 regulators, type, and corresponding input supply names: > > Regulator Type Supply Name Notes > @@ -86,6 +86,30 @@ LDO_IO1 : LDO : ips-supply > : GPIO 1 > RTC_LDO : LDO : ips-supply : always on > DRIVEVBUS : Enable output : drivevbus-supply : external regulator > > +AXP806 regulators, type, and corresponding input supply names: > + > +Regulator Type Supply Name Notes > +--------- ---- ----------- ----- > +DCDCA : DC-DC buck : vina-supply : poly-phase > capable > +DCDCB : DC-DC buck : vinb-supply : poly-phase > capable > +DCDCC : DC-DC buck : vinc-supply : poly-phase > capable > +DCDCD : DC-DC buck : vind-supply : poly-phase > capable > +DCDCE : DC-DC buck : vine-supply : poly-phase > capable > +ALDO1 : LDO : aldoin-supply : shared supply > +ALDO2 : LDO : aldoin-supply : shared supply > +ALDO3 : LDO : aldoin-supply : shared supply > +BLDO1 : LDO : bldoin-supply : shared supply > +BLDO2 : LDO : bldoin-supply : shared supply > +BLDO3 : LDO : bldoin-supply : shared supply > +BLDO4 : LDO : bldoin-supply : shared supply > +CLDO1 : LDO : cldoin-supply : shared supply > +CLDO2 : LDO : cldoin-supply : shared supply > +CLDO3 : LDO : cldoin-supply : shared supply > +SW : On/Off Switch : swin-supply > + > +Additionally, the AXP806 DC-DC regulators support poly-phase arrangements > +for higher output current. The possible groupings are: A+B, A+B+C, D+E. > + > AXP809 regulators, type, and corresponding input supply names: > > Regulator Type Supply Name Notes > -- > 2.9.3 >
