imx35 and compatible chipsets support loopback mode by setting a loopback control bit in the test register. Make this setting available for data transfers, similar to what we do for imx51.
Signed-off-by: Martin Kaiser <[email protected]> --- drivers/spi/spi-imx.c | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-) diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c index 5cc72be..53e7a32 100644 --- a/drivers/spi/spi-imx.c +++ b/drivers/spi/spi-imx.c @@ -455,6 +455,9 @@ static void mx51_ecspi_reset(struct spi_imx_data *spi_imx) #define MX31_CSPISTATUS 0x14 #define MX31_STATUS_RR (1 << 3) +#define MX31_CSPI_TESTREG 0x1C +#define MX31_TEST_LBC (1 << 14) + /* These functions also work for the i.MX35, but be aware that * the i.MX35 has a slightly different register layout for bits * we do not use here. @@ -510,6 +513,13 @@ static int mx31_config(struct spi_device *spi, struct spi_imx_config *config) writel(reg, spi_imx->base + MXC_CSPICTRL); + reg = readl(spi_imx->base + MX31_CSPI_TESTREG); + if (spi->mode & SPI_LOOP) + reg |= MX31_TEST_LBC; + else + reg &= ~MX31_TEST_LBC; + writel(reg, spi_imx->base + MX31_CSPI_TESTREG); + return 0; } @@ -1186,7 +1196,7 @@ static int spi_imx_probe(struct platform_device *pdev) spi_imx->bitbang.master->prepare_message = spi_imx_prepare_message; spi_imx->bitbang.master->unprepare_message = spi_imx_unprepare_message; spi_imx->bitbang.master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH; - if (is_imx51_ecspi(spi_imx)) + if (is_imx35_cspi(spi_imx) || is_imx51_ecspi(spi_imx)) spi_imx->bitbang.master->mode_bits |= SPI_LOOP; init_completion(&spi_imx->xfer_done); -- 1.7.10.4
