From: <sean.w...@mediatek.com> Date: Thu, 22 Sep 2016 10:33:53 +0800 > By default, GMAC0 is connected to built-in switch called > MT7530 through the proprietary interface called Turbo RGMII > (TRGMII). TRGMII also supports well for RGMII as generic external > PHY uses but requires some slight changes to the setup of TRGMII > and doesn't have well support on current driver. > > So this patchset > 1) provides the slight changes of the setup for RGMII can work > through TRGMII > 2) adds additional setting "trgmii" as PHY_INTERFACE_MODE_TRGMII > about phy-mode on device tree to make GMAC0 distinguish which > mode it runs > 3) changes dynamically source clock, TX/RX delay and interface > mode on TRGMII for adapting various link > > Changes since v1: > - fixed the style of comment which doesn't have a space at > the beginning and end of comment lines > - add support for phy-mode "trgmii" as PHY_INTERFACE_MODE_TRGMII > into linux/phy.h > - enhance the Documentation about device tree binding for trgmii > which is applicable only for GMAC0 which uses fixed-link
Series applied.