This series enables the tilcdc support for da850-lcdk. Besides the device tree changes it contains some tweaks needed to make it work.
Tested with a da850-lcdk board with an LCD display connected over VGA with the following modes: modetest -M tilcdc -s 26:800x600@RG16 modetest -M tilcdc -s 26:1024x768@RG16 Rebased on top of some necessary changes in the tilcdc drm driver. These changes will go upstream through the drm tree. Bartosz Golaszewski (3): ARM: dts: da850-lcdk: add support for 1024x768 resolution ARM: davinci: enable the LCDC DRM driver in defconfig ARM: da850: adjust memory settings for tilcdc Karl Beldan (3): ARM: davinci: da8xx-dt: add OF_DEV_AUXDATA entry for lcdc ARM: dts: da850: add a node for the LCD controller ARM: dts: da850-lcdk: enable the LCD controller arch/arm/boot/dts/da850-lcdk.dts | 71 ++++++++++++++++++++++++++++++ arch/arm/boot/dts/da850.dtsi | 8 ++++ arch/arm/configs/davinci_all_defconfig | 2 + arch/arm/mach-davinci/da8xx-dt.c | 44 ++++++++++++++++++ arch/arm/mach-davinci/include/mach/da8xx.h | 4 ++ 5 files changed, 129 insertions(+) -- 2.7.4